This means it can be now done in wxEventLoopBase itself and calls to
ProcessIdle() in the port-specific code are not needed any more, so remove
them.
This introduces a change in behaviour for wxMSW, where idle event handlers
were not invoked from inside wxYield() at all previously, and for wxOSX, where
only a single idle event is now generated from wxYield() instead of a stream
of them until no idle handler needs any more of them as before. But on the
bright side, the new behaviour seems to make most sense and is now the same in
all ports.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@78222 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
This should result in more expected, and more consistent with MSW, order of
the items differing in case only.
Also do the same for wxChoice in wxGTK1.
Closes#16356.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@76902 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
wxGTK1, wxGTK, wxMSW and wxOSX all did the same thing in their wxFrame dtor,
so just do it in wxFrameBase instead.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@76804 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Don't repeat the same code in all the ports, move it to the common base class
and add a new virtual DoYieldFor() for the really port-specific code.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@76061 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Deprecate the use of the old untyped constants but don't schedule them from
removal in a future wx version by removing "#if WXWIN_COMPATIBILITY_3_0" tests
around their definition and use. Provoking deprecation warnings in the code
using these constants is worth it as they are unclear and it's easy to make
mistakes when using them, but breaking this code compilation outright can't be
justified -- even in the future.
Also use more informational wxDEPRECATED_MSG() instead of a simple
wxDEPRECATED() as it might not be obvious at all how should the code be
updated exactly.
Finally, avoid the use of deprecated constants inside the library itself.
As a side effect, this closes#15814.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@75565 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
It was replaced by GTK+ printing several years ago and is almost never used
any longer anyhow, so any problems in this code (and there are some) would
never be found and fixed.
Also update the message catalogs to avoid having the strings not used any
more, as they were only used in Gnome printing code.
Closes#15517.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@74912 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Override CanScroll() in wxScrolled to return the real state of the scrollbar
instead of just relying on the wx[HV]SCROLL styles.
Closes#15440.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@74714 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
This keyword is not expanded by Git which means it's not replaced with the
correct revision value in the releases made using git-based scripts and it's
confusing to have lines with unexpanded "$Id$" in the released files. As
expanding them with Git is not that simple (it could be done with git archive
and export-subst attribute) and there are not many benefits in having them in
the first place, just remove all these lines.
If nothing else, this will make an eventual transition to Git simpler.
Closes#14487.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@74602 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
This commit changes wxExecute() to handle SIGCHLD to be notified about the
child process termination instead of detecting when the file descriptor
corresponding to the other end of a pipe opened in the parent process was
closed in the child as this was not reliable and could (and did) result in not
detecting the termination of the child processes that closed all their file
descriptors before exiting.
This commit also removes a lot of platform-specific code duplicating the
generic event loop sources support and reuses it for wxExecute() purposes too.
Final big change is that wxEndProcessData was merged into wxExecuteData and we
don't have two similar but quite different classes any more but just one,
which is used both to pass the information from wxExecute() to wxAppTraits
methods and to store this information until the child termination.
Closes#10258.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@74350 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
This method allows to request exiting from the given event loop even if it's
not the currently active one, unlike Exit() which would assert in this case.
With it, it becomes possible to ask the loop to terminate as soon as possible
even if a nested loop is currently running.
See #10258.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@74335 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Call it from public Run() after setting the loop as active and resetting
m_shouldExit flag.
No real changes, just cut down on the code duplication among the ports and
make it easier to implement the upcoming changes. see #10258.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@74333 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
This is similar to the existing GetLinesPerAction() but is for, surprise,
columns.
Also change the documentation to say that the value returned by both of these
methods is 3 under "most platforms" as some wxOSX currently uses 1 and not 3.
Closes#15239.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@74156 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Extract wxModalDialogHook from wx/testing.h into its own wx/modalhook.h,
extend it to allow to be notified not only about showing modal dialogs but
also about dismissing them and document it and show its use in the dialogs
sample.
Also replace all the WX_TESTING_SHOW_MODAL_HOOK macros occurrences with
WX_HOOK_MODAL_DIALOG.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@74037 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
wx/encinfo.h is not included from wx/wx.h so include it explicitly.
This is the same change as was done in r73519 for wxX11/wxMotif.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@73890 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Use the same short names as are used by the event table macros for the event
type constants themselves. This makes them much more comfortable to use, e.g.
Bind(wxEVT_BUTTON) compared to Bind(wxEVT_COMMAND_BUTTON_CLICKED).
The old long names are still kept for backwards compatibility and shouldn't be
removed as it doesn't really cost anything to continue providing them, but all
new event types should only use the short versions.
Closes#10661.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@73850 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Don't change the background colour when the control is being enabled or
disabled, it doesn't seem necessary and it's unclear why was this added by
r10179 in the first place. It does result in problems however as it could
somehow make the selection of wxTextCtrl invisible when it lost focus and so
fixes a serious usability problem which happened to all wxTextCtrls for which
a wxEVT_UPDATE_UI handler using wxUpdateUIEvent::Enable() was defined.
Closes#14898.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@73756 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
This reverts r72978, 72984, 72989 and 72992. Do not use wxNOEXCEPT for
wxTextCtrl dtor as this breaks compilation of any user-defined classes
inheriting from it unless they use wxNOEXCEPT as well and the benefits
(fixing a harmless warning for the niche ICC compiler) are just not worth
the compatibility breakage.
See #14826.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@72993 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
This is a temporary change, r72984 and the following changes (see #14826) will
probably be reverted soon anyhow, but for now at least fix wxGTK compilation.
Closes#14837.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@72989 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
This undoes the changes of r44773 because calling setlocale() resulted in C
locale being set differently from C++ locale which was confusing and led to
huge slowdowns in any code using std::stream with at least MinGW. And setting
the C++ locale to be the same, as r72719 tried to do, doesn't seem to be
practical as it results in immediate crashes under OS X and MinGW when used
under XP.
Do provide wxApp::SetCLocale() helper to explicitly do what was previously
done implicitly, even though currently it is a trivial wrapper for setlocale()
and we don't even need to call gtk_set_locale() as it has never done anything
else and is deprecated since GTK+ 2.24.
Closes#14780.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@72951 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
This allows to get rid of ugly preprocessor checks due to the fact that this
function could be defined in one or the other library depending on the port
used and also fix a problem with it being defined differently in the base
library depending on which GUI port (Carbon or Cocoa) was used under OS X.
It also fixes the problem with wxBell() in wxGTK under Windows.
Closes#14406.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@71797 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Make use of HasImageList() and GetImageList() instead of accessing the now private m_imageList directly. Fixed for wxUniv, wxGTK1, and wxOS2 (the latter 2 blindly). Changes are similar to r68856 and should have been a part of that.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@68857 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Additionally renamed wxOSX' private wxNativePrinterDC::Ok() function to IsOk().
Didn't deprecate the various Ok() functions: given the amount of changes already introduced in 3.0 a trivial one like this seems more suitable for after 3.0.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@67681 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Applied patch by snowleopard2 fixing a bunch of typos such as misspellings and double words in the documentation. Combined the patch with some local queued typos waiting to be committed as well as adding new typo fixes inspired by the patch.
Function names with American spelling were not changed nor was third-party code touched. The only code changes involve some changes in strings that are translated ("Can not" -> "Cannot").
Closes#13063 (again).
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@67280 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Fixed commented names (path, filename, and extension) of files in include/ and src/. Prepended the names in src/ with "src/" everywhere, while starting those in include/wx/ with "wx/".
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@67254 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
No real changes, just remove markup parsing code from wxStaticText
implementation and reuse wxMarkupParser methods there instead.
This makes include/wx/private/stattext.h file unnecessary as it is used only
in a single place now so remove it and move its remaining contents to
src/gtk/mnemonics.cpp.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@67050 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Instead of constructs such as if "( s.length() )" and "if (s.length() > 0)" use "if ( !s.empty() )" instead. Similarly for "if (s.length() == 0)" or "if ( s.IsNull() )", use "if ( s.empty() )".
No code changes intended except for a few instances where a construct like "if ( s.length() && wxFileExists(s) )" was changed to not check the length of the string and let wxFileExists handle such cases.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@66728 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
This eliminates a linking dependency that would drag in the printing
code for any program that used wxColourDialog or wxFontDialog (which
is currently all of them, due to more link dependencies...)
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@66615 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
