These methods do the same thing, so it seems better to use the same name
for them.
This is not really a backwards-incompatible change, as these methods
were just added in the parent commit, so nobody is using them yet.
Don't blankly forbid selecting any blocks at all in this mode, this
didn't really make any sense.
Moreover, SelectBlock() not doing anything prevented wxGrid code
handling {Ctrl,Shift}-Space from doing anything in this mode and, worse,
broke the logic of DeselectBlock() which relied on using SelectBlock()
to select the remaining parts of the selection, so this commit fixes
using Ctrl-click for deselecting rows or columns in this selection mode,
which was previously completely broken.
No real changes, just make the code more clear by always explicitly
selecting either wxHORIZONTAL or wxVERTICAL instead of default for the
former for no good reason (by symmetry, it is not a better choice than
wxVERTICAL).
Also list all wxGridSelection enum elements in the switch over selection
mode to avoid warnings about not handling wxGridSelectRows.
Unselected current cell should always be considered as the current
selection block to extend, as it doesn't make sense to extend any other
block (perhaps selected on another side of the grid) when pressing
Shift-arrow.
This scenario could be achieved by selecting a block and Ctrl-clicking a
cell (either inside or outside the selection) twice and then extending
it using Shift-arrow keys. Previously, this behaved in a strange way,
combining the corner of the selected block with the target of the
movement, whereas now this just starts selecting a new block from the
current cell as expected.
Update the cells that had to be deselected due to the selection mode
change.
This used to work, but the refresh was lost during a previous
refactoring.
Extending the selection with Ctrl-arrows is different from all the other
cases, as we need to combine both the selection anchor and the current
cell coordinates when doing it.
This means that we can't reuse the same PrepareForSelectionExpansion()
helper for this case, so this function is not useful finally and this
commit removes it entirely. It also replaces GetCurrentBlockCornerRow()
and GetCurrentBlockCornerCol() functions with GetExtensionAnchor() which
combines both of them.
Finally, it adds wxGridDirectionOperations::TryToAdvance() helper to
avoid repeating the IsAtBoundary() check which was previously part of
PrepareForSelectionExpansion() in multiple places.
And because the "extending" and normal parts of DoMoveCursorByBlock()
are so different now, it also factors out AdvanceByBlock() helper which
can be used to keep these parts well separate from each other instead of
intermixing them together.
With all these preparatory changes, it's finally possible to implement
the "extending selection by block" logic relatively easily, with the
bulk of this branch actually taken by comments explaining why do we have
to do what we do.
Add unit tests verifying that the functions used by Shift-Ctrl-arrow
work as expected.
The selBlock reference could be used after the vector invalidation,
which resulted in using the wrong vector element at best and could
probably lead to a crash at worst.
Don't use it after invalidating the vector any longer.
This notably fixes a bug in row-or-column selection mode where the grid
wasn't updated visually after modifying its selection by deselecting a
single cell as soon as there were more than one selected row or column.
This function finally doesn't ever create a new block, except for the
trivial case when there is no current block, so rename it to a simpler
and more clear name.
No real changes.
We should never adjust the fixed coordinate of the selection blocks in
this mode, so ensure we never end up with a partially selected line in
this case by preserving the -- correct by construction -- current block
coordinates in this direction.
Extend the current block to the entire line when the corresponding
header is Shift-clicked and, importantly, keep the full-line selection
when using Shift-arrows later to make the selection behave in the
expected way.
This made the logic of this function unnecessarily more complicated.
Instead, just fall back to the current cell coordinates in the only
place where this could happen before.
Doing this still preserves the correct behaviour of Shift-arrow
selection when entire rows/columns are selected and the current cell is
not the leftmost/topmost cell (due to scrolling), but the code is
simpler.
Remove the now always true condition check and assert that it's indeed
always true.
Note that the changes to gridsel.cpp in this commit are best viewed
ignoring whitespace changes.
The difference between calling SelectAll() and SelectBlock() with a
block covering the entire grid is that the former discards any
previously selected blocks, which become clearly redundant.
As a consequence, clicking on the grid corner 10 times in a row still
results in a selection with a single block, not 10 (identical) blocks.
Don't use long-lived non-const "block" reference, this makes it
difficult to see that it's never changed until the very end of the
function, when it's updated.
Compare "blockStart" with "block" itself instead of comparing it with
"newBlock" which is initially its copy but gets modified later (however
these modifications don't affect the comparisons involving it).
Add a comment explaining why are we doing what we do here.
Don't try to extend the existing selected blocks to rows/columns, this
contradicts the documented behaviour which is to discard the selected
blocks that become invalid in the new mode.
Do handle switching to wxGridSelectRowsOrColumns mode, as there doesn't
seem to be any reason not to.
Update the tests to check for the expected selection update behaviour.
Change the return type of this function to a simple and clear bool
instead of 3-valued int requiring a special explanation. This is simpler
and not any less efficient as checking for whether one block contains
another or the other one contains this one are separate operations
anyhow.
Rename the function to a more grammatically correct name.
Also move it inline as it's now trivial enough for this to be worth it.
Really edit the current selection block instead of storing the temporary
information about the current selection and applying it on releasing Shift
key or LKM.
Store all types of selection with an array of blocks instead of arrays of
cells, blocks, rows and columns.
It (hopefully) simplifies the code and allows us to implement editing of
the last selection block much easier.
This simple function combines BlockToDeviceRect() and
wxWindow::Refresh() calls and allows to avoid the ugly casts in
wxGridSelection code as well as making the code slightly shorter and
more clear.
No real changes.
The loop over the existing selection was buggy and took into account only one
corner of the block instead of the entire block and also skipped some blocks
entirely.
Closes#17572.
This keyword is not expanded by Git which means it's not replaced with the
correct revision value in the releases made using git-based scripts and it's
confusing to have lines with unexpanded "$Id$" in the released files. As
expanding them with Git is not that simple (it could be done with git archive
and export-subst attribute) and there are not many benefits in having them in
the first place, just remove all these lines.
If nothing else, this will make an eventual transition to Git simpler.
Closes#14487.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@74602 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Use wxGridSelection::m_rowSelection and m_colSelection for storing the
selected rows/columns respectively instead of storing them in m_blockXXX
arrays. This makes more sense and allows to easily implement the proper
handling of Ctrl-clicking in the row or column selection modes.
Closes#12638.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@70177 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
(which is still probably buggy, wxGridSelection needs to be reviewed)
- Add XYToCell() overloads returning wxGridCellCoords (instead of modifying the
argument passed by reference -- where did this come from?) and document them.
- Added GoToCell() which does make the new current cell visible unlike
SetGridCursor() (which was documented as doing it, but wasn't)
- Changed SetCurrentCell() to only not change the cell if wxEVT_GRID_SELECT_CELL
it generates is vetoed, not just processed as this seems to make more sense
- Split jumbo (~400 lines) ProcessGridCellMouseEvent() function into chunks
- Add many more comments to make reading this code seem less like puzzle
solving for the next unfortunate soul to do it
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@55746 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
