Some doc proofreading

git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@6718 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775

docs/latex/wx/app.tex

@@ -246,7 +246,7 @@ wxWindows' strategy for OnIdle processing is as follows. After pending user inte
 application have all been processed, wxWindows sends an OnIdle event to the application object. wxApp::OnIdle itself
 sends an OnIdle event to each application window, allowing windows to do idle processing such as updating
 their appearance. If either wxApp::OnIdle or a window OnIdle function requested more time, by
-caling \helpref{wxIdleEvent::ReqestMore}{wxidleeventrequestmore}, wxWindows will send another OnIdle
+caling \helpref{wxIdleEvent::RequestMore}{wxidleeventrequestmore}, wxWindows will send another OnIdle
 event to the application object. This will occur in a loop until either a user event is found to be
 pending, or OnIdle requests no more time. Then all pending user events are processed until the system
 goes idle again, when OnIdle is called, and so on.
@@ -476,7 +476,9 @@ can be overridden by the user to change the default icons.
 
 \wxheading{Parameters}
 
-\docparam{which}{One of the wxICON\_XXX defines and chooses which icon to return.}
+\docparam{which}{One of the wxICON\_XXX specifies which icon to return.}
+
+See \helpref{wxMessageBox}{wxmessagebox} for a list of icon identifiers.
 
 \membersection{wxApp::SetUseBestVisual}\label{wxappsetusebestvisual}
 
@@ -487,7 +489,7 @@ on systems that support several visual on the same display. This is typically th
 case under Solaris and IRIX, where the default visual is only 8-bit whereas certain
 appications are supposed to run in TrueColour mode.
 
-Note that this function has to be called in the constructor of the {\tt wxApp}
+Note that this function has to be called in the constructor of the {\tt wxApp} 
 instance and won't have any effect when called later on.
 
 This function currently only has effect under GTK.

docs/latex/wx/array.tex

@@ -261,6 +261,7 @@ WX_DEFINE_SORTED_ARRAY(MyClass *, wxArrayOfMyClass);
 
 You will have to initialize the objects of this class by passing a comparaison
 function to the array object constructor like this:
+
 \begin{verbatim}
 int CompareInts(int n1, int n2)
 {

docs/latex/wx/arrstrng.tex

@@ -175,9 +175,9 @@ Insert("foo", 0);
 If {\it nIndex} is equal to {\it GetCount() + 1} this function behaves as 
 \helpref{Add}{wxarraystringadd}.
 
-{\bf Warning:} this function should not be used with sorted array because it
+{\bf Warning:} this function should not be used with sorted arrays because it
 could break the order of items and, for example, subsequent calls to 
-\helpref{Index()}{wxarraystringindex} would not work then!
+\helpref{Index()}{wxarraystringindex} would then not work!
 
 \membersection{wxArrayString::IsEmpty}\label{wxarraystringisempty}
 
@@ -235,12 +235,12 @@ See also: \helpref{Alloc}{wxarraystringalloc}, \helpref{Dynamic array memory man
 
 \func{void}{Sort}{\param{bool}{ reverseOrder = FALSE}}
 
-Sorts the array in alphabetical order or in reverse alphabetical order if
+Sorts the array in alphabetical order or in reverse alphabetical order if 
 {\it reverseOrder} is TRUE.
 
 {\bf Warning:} this function should not be used with sorted array because it
 could break the order of items and, for example, subsequent calls to 
-\helpref{Index()}{wxarraystringindex} would not work then!
+\helpref{Index()}{wxarraystringindex} would then not work!
 
 See also: \helpref{Sort}{wxarraystringsortcallback}
 
@@ -250,7 +250,7 @@ See also: \helpref{Sort}{wxarraystringsortcallback}
 
 Sorts the array using the specified {\it compareFunction} for item comparison.
 {\it CompareFunction} is defined as a function taking two {\it const
-wxString\&} parameters and returning {\it int} value less than, equal to or
+wxString\&} parameters and returning an {\it int} value less than, equal to or
 greater than 0 if the first string is less than, equal to or greater than the
 second one.
 
@@ -278,7 +278,7 @@ array.Sort(CompareStringLen);
 
 {\bf Warning:} this function should not be used with sorted array because it
 could break the order of items and, for example, subsequent calls to 
-\helpref{Index()}{wxarraystringindex} would not work then!
+\helpref{Index()}{wxarraystringindex} would then not work!
 
 See also: \helpref{Sort}{wxarraystringsort}
 

docs/latex/wx/bmpdatob.tex

@@ -1,7 +1,7 @@
 \section{\class{wxBitmapDataObject}}\label{wxbitmapdataobject}
 
 wxBitmapDataObject is a specialization of wxDataObject for bitmap data. It can
-be used without change to paste data into the
+be used without change to paste data into the 
 \helpref{wxClipboard}{wxclipboard} or a \helpref{wxDropSource}{wxdropsource}. A
 user may wish to derive a new class from this class for providing a bitmap
 on-demand in order to minimize memory consumption when offering data in several
@@ -14,7 +14,7 @@ methods.}
 
 \wxheading{Virtual functions to override}
 
-This class may be used as is, but
+This class may be used as is, but 
 \helpref{GetBitmap}{wxbitmapdataobjectgetbitmap} may be overridden to increase
 efficiency.
 
@@ -29,17 +29,17 @@ efficiency.
 
 \wxheading{See also}
 
-\helpref{Clipboard and drag and drop overview}{wxdndoverview},
+\helpref{Clipboard and drag and drop overview}{wxdndoverview}, 
-\helpref{wxDataObject}{wxdataobject},
+\helpref{wxDataObject}{wxdataobject}, 
-\helpref{wxDataObjectSimple}{wxdataobjectsimple},
+\helpref{wxDataObjectSimple}{wxdataobjectsimple}, 
-\helpref{wxFileDataObject}{wxfiledataobject},
+\helpref{wxFileDataObject}{wxfiledataobject}, 
-\helpref{wxTextDataObject}{wxtextdataobject},
+\helpref{wxTextDataObject}{wxtextdataobject}, 
 \helpref{wxDataObject}{wxdataobject}
 
 \func{}{wxBitmapDataObject}{\param{const wxBitmap\& }{bitmap = wxNullBitmap}}
 
-Constructor, optionally passing a bitmap (otherwise use
+Constructor, optionally passing a bitmap (otherwise use 
-\helpref{SetBitmap}{wxbitmapdataobjectsetbitmap} later)
+\helpref{SetBitmap}{wxbitmapdataobjectsetbitmap} later).
 
 \membersection{wxBitmapDataObject::GetBitmap}\label{wxbitmapdataobjectgetbitmap}
 

docs/latex/wx/body.tex

@@ -6,16 +6,15 @@
 \section{What is wxWindows?}
 
 wxWindows is a C++ framework providing GUI (Graphical User
-Interface) and other facilities on more than one platform.  Version 2.0 currently
+Interface) and other facilities on more than one platform.  Version 2 currently
-supports MS Windows (16-bit, Windows 95 and Windows NT), Unix with GTK+, and Unix with Motif.
+supports MS Windows (16-bit, Windows 95 and Windows NT), Unix with GTK+, Unix with Motif,
-A Mac port is in an advanced state, an OS/2 port and a port to the MGL graphics library
+and Mac. An OS/2 port is in progress.
-have been started.
 
 wxWindows was originally developed at the Artificial Intelligence
-Applications Institute, University of Edinburgh, for internal use.
+Applications Institute, University of Edinburgh, for internal use,
-wxWindows has been released into the public domain in the hope
+and was first made publicly available in 1993.
-that others will also find it useful. Version 2.0 is written and
+Version 2 is a vastly improved version written and maintained by
-maintained by Julian Smart, Robert Roebling, Vadim Zeitlin and others.
+Julian Smart, Robert Roebling, Vadim Zeitlin and many others.
 
 This manual discusses wxWindows in the context of multi-platform
 development.\helpignore{For more detail on the wxWindows version 2.0 API
@@ -44,9 +43,9 @@ Since wxWindows was started, several other free or almost-free GUI frameworks ha
 emerged. However, none has the range of features, flexibility, documentation and the
 well-established development team that wxWindows has.
 
-As public domain software and a project open to everyone, wxWindows has
+As open source software, wxWindows has
 benefited from comments, ideas, bug fixes, enhancements and the sheer
-enthusiasm of users, especially via the Internet. This gives wxWindows a
+enthusiasm of users. This gives wxWindows a
 certain advantage over its commercial competitors (and over free libraries
 without an independent development team), plus a robustness against
 the transience of one individual or company. This openness and
@@ -54,10 +53,10 @@ availability of source code is especially important when the future of
 thousands of lines of application code may depend upon the longevity of
 the underlying class library.
 
-Version 2.0 goes much further than previous versions in terms of generality and features,
+Version 2 goes much further than previous versions in terms of generality and features,
 allowing applications to be produced
 that are often indistinguishable from those produced using single-platform
-toolkits such as Motif and MFC.
+toolkits such as Motif, GTK+ and MFC.
 
 The importance of using a platform-independent class library cannot be
 overstated, since GUI application development is very time-consuming,
@@ -66,9 +65,9 @@ Code can very quickly become obsolete if it addresses the wrong
 platform or audience.  wxWindows helps to insulate the programmer from
 these winds of change. Although wxWindows may not be suitable for
 every application (such as an OLE-intensive program), it provides access to most of the functionality a
-GUI program normally requires, plus some extras such as network programming
+GUI program normally requires, plus many extras such as network programming,
-and PostScript output, and can of course be extended as needs dictate.  As a bonus, it provides
+PostScript output, and HTML rendering; and it can of course be extended as needs dictate.  As a bonus, it provides
-a cleaner programming interface than the native
+a far cleaner and easier programming interface than the native
 APIs. Programmers may find it worthwhile to use wxWindows even if they
 are developing on only one platform.
 
@@ -80,8 +79,8 @@ here are some of the benefits:
 \item You get the source.
 \item Available on a variety of popular platforms.
 \item Works with almost all popular C++ compilers and Python.
-\item Over 40 example programs.
+\item Over 50 example programs.
-\item Over 900 pages of printable and on-line documentation.
+\item Over 1000 pages of printable and on-line documentation.
 \item Includes Tex2RTF, to allow you to produce your own documentation
 in Windows Help, HTML and Word RTF formats.
 \item Simple-to-use, object-oriented API.
@@ -97,7 +96,7 @@ in Windows Help, HTML and Word RTF formats.
 \item Under MS Windows, support for creating metafiles and copying
 them to the clipboard.
 \item An API for invoking help from applications.
-\item Ready to use HTML window (supporting a subset of HTML).
+\item Ready-to-use HTML window (supporting a subset of HTML).
 \item Dialog Editor for building dialogs.
 \item Network support via a family of socket and protocol classes.
 \item Support for platform independent image procesing.
@@ -222,9 +221,11 @@ Metrowerks CodeWarrior.
 
 \section{Availability and location of wxWindows}
 
-wxWindows is available by anonymous FTP and World Wide Web
+\winhelponly{wxWindows is available by anonymous FTP and World Wide Web
+from ftp://www.remstar.com/pub/wxwin and/or http://www.wxwindows.org.}
+\winhelpignore{wxWindows is available by anonymous FTP and World Wide Web
 from \urlref{ftp://www.remstar.com/pub/wxwin}{ftp://www.remstar.com/pub/wxwin} 
-and/or \urlref{http://www.wxwindows.org}{http://www.wxwindows.org}
+and/or \urlref{http://www.wxwindows.org}{http://www.wxwindows.org}.}
 
 You can also buy a CD-ROM using the form on the Web site, or by contacting:
 
@@ -326,8 +327,8 @@ system it is created on and the version you are using. The library name for the
 GTK version of wxWindows 2.2 on Linux and Solaris will be libwx\_gtk-2.2.so.0.0.0,
 on HP-UX, it will be libwx\_gtk-2.2.sl, on AIX just libwx\_gtk.a etc.
 
-Under Windows, use the library wx.lib for stand-alone Windows
+Under Windows, use the library wx.lib (release) or wxd.lib (debug) for stand-alone Windows
-applications, or wxdll.lib for creating DLLs.
+applications, or wxdll.lib (wxdlld.lib) for creating DLLs.
 
 \section{Configuration}
 

docs/latex/wx/boxsizer.tex

@@ -100,21 +100,21 @@ or wxHORIZONTAL for creating either a column sizer or a row sizer.
 \func{void}{RecalcSizes}{\void}
 
 Implements the calculation of a box sizer's dimensions and then sets
-the size of its its children (calling \helpref{wxWindow::SetSize}{wxwindowsetsize}
+the size of its its children (calling \helpref{wxWindow::SetSize}{wxwindowsetsize} 
 if the child is a window). It is used internally only and must not be called
-by the users. Documented for information.
+by the user. Documented for information.
 
 \membersection{wxBoxSizer::CalcMin}\label{wxboxsizercalcmin}
 
 \func{wxSize}{CalcMin}{\void}
 
 Implements the calculation of a box sizer's minimal. It is used internally
-only and must not be called by the users. Documented for information.
+only and must not be called by the user. Documented for information.
 
 \membersection{wxBoxSizer::GetOrientation}\label{wxboxsizergetorientation}
 
 \func{int}{GetOrientation}{\void}
 
-Returns the orientation of the boxsizer, either of wxVERTICAL
+Returns the orientation of the box sizer, either wxVERTICAL
 or wxHORIZONTAL.
 

docs/latex/wx/classes.tex

@@ -37,6 +37,7 @@
 \input conditn.tex
 \input config.tex
 \input control.tex
+\input countstr.tex
 \input critsect.tex
 \input crtslock.tex
 \input custdobj.tex

docs/latex/wx/countstr.tex

@@ -0,0 +1,46 @@
+% -----------------------------------------------------------------------------
+% wxCountingOutputStream
+% -----------------------------------------------------------------------------
+\section{\class{wxCountingOutputStream}}\label{wxcountingoutputstream}
+
+wxCountingOutputStream is a specialized output stream which does not write any data anyway,
+instead it counts how many bytes would get written if this were a normal stream. This
+can sometimes be useful or required if some data gets serialized to a stream or compressed
+by using stream compression and thus the final size of the stream cannot be known other
+than pretending to write the stream. One case where the resulting size would have to be
+known is if the data has to be written to a piece of memory and the memory has to be
+allocated before writing to it (which is probably always the case when writing to a 
+memory stream).
+
+\wxheading{Derived from}
+
+\helpref{wxOutputStream}{wxoutputstream}
+\helpref{wxStreamBase}{wxstreambase}
+
+\wxheading{Include files}
+
+<wx/stream.h>
+
+\latexignore{\rtfignore{\wxheading{Members}}}
+
+% -----------
+% ctor & dtor
+% -----------
+\membersection{wxCountingOutputStream::wxCountingOutputStream}
+
+\func{}{wxCountingOutputStream}{\void}
+
+Creates a wxCountingOutputStream object.
+
+\membersection{wxCountingOutputStream::\destruct{wxCountingOutputStream}}
+
+\func{}{\destruct{wxCountingOutputStream}}{\void}
+
+Destructor.
+
+\membersection{wxCountingOutputStream::GetSize}
+
+\constfunc{size\_t}{GetSize}{\void}
+
+Returns the current size of the stream.
+

docs/latex/wx/custdobj.tex

@@ -1,6 +1,6 @@
 \section{\class{wxCustomDataObject}}\label{wxcustomdataobject}
 
-wxCustomDataObject is a specialization of
+wxCustomDataObject is a specialization of 
 \helpref{wxDataObjectSimple}{wxdataobjectsimple} for some
 application-specific data in arbitrary (either custom or one of the standard
 ones). The only restriction is that it is supposed that this data can be
@@ -8,8 +8,8 @@ copied bitwise (i.e. with {\tt memcpy()}), so it would be a bad idea to make
 it contain a C++ object (though C struct is fine).
 
 By default, wxCustomDataObject stores the data inside in a buffer. To put the
-data into the buffer you may use either
+data into the buffer you may use either 
-\helpref{SetData}{wxcustomdataobjectsetdata} or
+\helpref{SetData}{wxcustomdataobjectsetdata} or 
 \helpref{TakeData}{wxcustomdataobjecttakedata} depending on whether you want
 the object to make a copy of data or not.
 
@@ -20,9 +20,9 @@ the virtual functions mentioned below.
 \wxheading{Virtual functions to override}
 
 This class may be used as is, but if you don't want store the data inside the
-object but provide it on demand instead, you should override
+object but provide it on demand instead, you should override 
-\helpref{GetSize}{wxcustomdataobjectgetsize},
+\helpref{GetSize}{wxcustomdataobjectgetsize}, 
-\helpref{GetData}{wxcustomdataobjectgetdata} and
+\helpref{GetData}{wxcustomdataobjectgetdata} and 
 \helpref{SetData}{wxcustomdataobjectsetdata} (or may be only the first two or
 only the last one if you only allow reading/writing the data)
 
@@ -46,7 +46,7 @@ only the last one if you only allow reading/writing the data)
 \func{}{wxCustomDataObject}{\param{const wxDataFormat\& }{format = wxFormatInvalid}}
 
 The constructor accepts a {\it format} argument which specifies the (single)
-format supported by this object. If it isn't set here,
+format supported by this object. If it isn't set here, 
 \helpref{SetFormat}{wxdataobjectsimplesetformat} should be used.
 
 \membersection{wxCustomDataObject::\destruct{wxCustomDataObject}}\label{wxcustomdataobjectdtor}

docs/latex/wx/database.tex

@@ -3,6 +3,9 @@
 Every database object represents an ODBC connection.
 The connection may be closed and reopened.
 
+Note: this class is considered obsolete, replaced by the Remstar wxDB/wxTable classes
+(documented separately in Word and PDF format, as odbc.doc and odbc.pdf).
+
 \wxheading{Derived from}
 
 \helpref{wxObject}{wxobject}

docs/latex/wx/dataform.tex

@@ -48,7 +48,7 @@ do clipboard format registration at this time will usually lead to a crash!
 
 \wxheading{Virtual functions to override}
 
-None, this class doesn't have any.
+None
 
 \wxheading{Derived from}
 

docs/latex/wx/dataobj.tex

@@ -33,7 +33,7 @@ enum Direction
 };
 \end{verbatim}
 
-which allows to distinguish between them. See
+which allows to distinguish between them. See 
 \helpref{wxDataFormat}{wxdataformat} documentation for more about formats.
 
 Not surprizingly, being 'smart' comes at a price of added complexity. This is
@@ -42,8 +42,8 @@ but may be annoying if you only want to do something simple like cut and paste
 text.
 
 To provide a solution for both cases, wxWindows has two predefined classes
-which derive from wxDataObject: \helpref{wxDataObjectSimple}{wxdataobjectsimple} and
+which derive from wxDataObject: \helpref{wxDataObjectSimple}{wxdataobjectsimple} and 
-\helpref{wxDataObjectComposite}{wxdataobjectcomposite}.
+\helpref{wxDataObjectComposite}{wxdataobjectcomposite}. 
 \helpref{wxDataObjectSimple}{wxdataobjectsimple} is
 the simplest wxDataObject possible and only holds data in a single format (such
 as HTML or text) and \helpref{wxDataObjectComposite}{wxdataobjectcomposite} is
@@ -54,18 +54,18 @@ So, you have several solutions when you need a wxDataObject class (and you need
 one as soon as you want to transfer data via the clipboard or drag and drop):
 
 \begin{twocollist}\itemsep=1cm
-\twocolitem{{\bf 0. Use one of built-in classes}}{You may use wxTextDataObject,
+\twocolitem{{\bf 1. Use one of the built-in classes}}{You may use wxTextDataObject,
 wxBitmapDataObject or wxFileDataObject in the simplest cases when you only need
 to support one format and your data is either text, bitmap or list of files.}
-\twocolitem{{\bf 1. Use wxDataObjectSimple}}{Deriving from wxDataObjectSimple is the simplest
+\twocolitem{{\bf 2. Use wxDataObjectSimple}}{Deriving from wxDataObjectSimple is the simplest
 solution for custom data - you will only support one format and so probably
 won't be able to communicate with other programs, but data transfer will work
 in your program (or between different copies of it).}
-\twocolitem{{\bf 2. Use wxDataObjectComposite}}{This is a simple but powerful
+\twocolitem{{\bf 3. Use wxDataObjectComposite}}{This is a simple but powerful
 solution which allows you to support any number of formats (either
 standard or custom if you combine it with the previous solution).}
-\twocolitem{{\bf 3. Use wxDataObject directly}}{This is the solution for
+\twocolitem{{\bf 4. Use wxDataObject directly}}{This is the solution for
-maximal flexibility and efficiency, but it also is the most difficult to
+maximal flexibility and efficiency, but it is also is the most difficult to
 implement.}
 \end{twocollist}
 
@@ -86,12 +86,12 @@ clipboard after having pressed 'Copy' - in reality it is only declared to be
 available.
 
 There are several predefined data object classes derived from
-wxDataObjectSimple: \helpref{wxFileDataObject}{wxfiledataobject},
+wxDataObjectSimple: \helpref{wxFileDataObject}{wxfiledataobject}, 
-\helpref{wxTextDataObject}{wxtextdataobject} and
+\helpref{wxTextDataObject}{wxtextdataobject} and 
 \helpref{wxBitmapDataObject}{wxbitmapdataobject} which can be used without
 change.
 
-You may also derive your own data object classes from
+You may also derive your own data object classes from 
 \helpref{wxCustomDataObject}{wxcustomdataobject} for user-defined types. The
 format of user-defined data is given as mime-type string literal, such as
 "application/word" or "image/png". These strings are used as they are under
@@ -101,7 +101,7 @@ and from the clipboard and for drag and drop). Note that the format string
 translation under Windows is not yet finished.
 
 \pythonnote{At this time this class is not directly usable from wxPython.
-Derive a class from \helpref{wxPyDataObjectSimple}{wxdataobjectsimple}
+Derive a class from \helpref{wxPyDataObjectSimple}{wxdataobjectsimple} 
 instead.}
 
 \wxheading{Virtual functions to override}
@@ -110,7 +110,7 @@ Each class derived directly from wxDataObject must override and implement all
 of its functions which are pure virtual in the base class.
 
 The data objects which only render their data or only set it (i.e. work in
-only one direction), should return 0 from
+only one direction), should return 0 from 
 \helpref{GetFormatCount}{wxdataobjectgetformatcount}.
 
 \wxheading{Derived from}
@@ -123,15 +123,15 @@ None
 
 \wxheading{See also}
 
-\helpref{Clipboard and drag and drop overview}{wxdndoverview},
+\helpref{Clipboard and drag and drop overview}{wxdndoverview}, 
-\helpref{DnD sample}{samplednd},
+\helpref{DnD sample}{samplednd}, 
-\helpref{wxFileDataObject}{wxfiledataobject},
+\helpref{wxFileDataObject}{wxfiledataobject}, 
-\helpref{wxTextDataObject}{wxtextdataobject},
+\helpref{wxTextDataObject}{wxtextdataobject}, 
-\helpref{wxBitmapDataObject}{wxbitmapdataobject},
+\helpref{wxBitmapDataObject}{wxbitmapdataobject}, 
-\helpref{wxCustomDataObject}{wxcustomdataobject},
+\helpref{wxCustomDataObject}{wxcustomdataobject}, 
-\helpref{wxDropTarget}{wxdroptarget},
+\helpref{wxDropTarget}{wxdroptarget}, 
-\helpref{wxDropSource}{wxdropsource},
+\helpref{wxDropSource}{wxdropsource}, 
-\helpref{wxTextDropTarget}{wxtextdroptarget},
+\helpref{wxTextDropTarget}{wxtextdroptarget}, 
 \helpref{wxFileDropTarget}{wxfiledroptarget}
 
 \latexignore{\rtfignore{\wxheading{Members}}}
@@ -152,7 +152,7 @@ Destructor.
 
 \constfunc{virtual void}{GetAllFormats}{ \param{wxDataFormat *}{formats}, \param{Direction}{ dir = Get}}
 
-Copy all supported formats in the given direction to the array pointed to by
+Copy all supported formats in the given direction to the array pointed to by 
 {\it formats}. There is enough space for GetFormatCount(dir) formats in it.
 
 \membersection{wxDataObject::GetDataHere}\label{wxdataobjectgetdatahere}

docs/latex/wx/date.tex

@@ -2,9 +2,9 @@
 
 A class for manipulating dates.
 
-{\bf NOTE:} this class should be
+{\bf NOTE:} this class is retained only for compatibility,
-used with caution, since it is not fully tested. It will be replaced
+and has been replaced by \helpref{wxDateTime}{wxdatetime}. wxDate
-with a new wxDateTime class in the near future.
+may be withdrawn in future versions of wxWindows.
 
 \wxheading{Derived from}
 

docs/latex/wx/datetime.tex

@@ -26,8 +26,7 @@ wxDateTime object.
 All the following constants are defined inside wxDateTime class (i.e., to refer to
 them you should prepend their names with {\tt wxDateTime::}).
 
-Time zone symbolic names:%\label{wxdatetimetimezones} % Sorry, labels not allowed here.
+Time zone symbolic names:
-
 
 \begin{verbatim}
     enum TZ
@@ -116,7 +115,7 @@ wxDateSpan,\rtfsp
 
 \membersection{Static functions}
 
-For convinience, all static functions are collected here. These functions
+For convenience, all static functions are collected here. These functions
 either set or return the static variables of wxDateSpan (the country), return
 the current moment, year, month or number of days in it, or do some general
 calendar-related actions.

docs/latex/wx/datstrm.tex

@@ -17,6 +17,7 @@ is defined as signed int on 32-bit architectures) so that you cannot use long. T
 problems (here and elsewhere), make use of the wxInt32, wxUint32, etc types.
 
 For example:
+
 \begin{verbatim}
   wxFileInputStream input( "mytext.dat" );
   wxDataInputStream store( input );

docs/latex/wx/dc.tex

@@ -176,7 +176,7 @@ a transparency mask, the bitmap will be drawn transparently.
 
 When drawing a mono-bitmap, the current text foreground colour will be used to draw the foreground
 of the bitmap (all bits set to 1), and the current text background colour to draw the background
-(all bits set to 0). See also \helpref{SetTextForeground}{wxdcsettextforeground},
+(all bits set to 0). See also \helpref{SetTextForeground}{wxdcsettextforeground}, 
 \helpref{SetTextBackground}{wxdcsettextbackground} and \helpref{wxMemoryDC}{wxmemorydc}.
 
 \membersection{wxDC::DrawCheckMark}\label{wxdcdrawcheckmark}

docs/latex/wx/dobjsmpl.tex

@@ -11,7 +11,7 @@
 
 \section{\class{wxDataObjectSimple}}\label{wxdataobjectsimple}
 
-This is the simplest possible implementation of
+This is the simplest possible implementation of the 
 \helpref{wxDataObject}{wxdataobject} class. The data object of (a class derived
 from) this class only supports one format, so the number of virtual functions
 to be implemented is reduced.
@@ -26,8 +26,8 @@ methods.}
 
 \wxheading{Virtual functions to override}
 
-The objects supporting rendering the data must override
+The objects supporting rendering the data must override 
-\helpref{GetDataSize}{wxdataobjectsimplegetdatasize} and
+\helpref{GetDataSize}{wxdataobjectsimplegetdatasize} and 
 \helpref{GetDataHere}{wxdataobjectsimplegetdatahere} while the objects which
 may be set must override \helpref{SetData}{wxdataobjectsimplesetdata}. Of
 course, the objects supporting both operations must override all threee
@@ -43,10 +43,10 @@ methods.
 
 \wxheading{See also}
 
-\helpref{Clipboard and drag and drop overview}{wxdndoverview},
+\helpref{Clipboard and drag and drop overview}{wxdndoverview}, 
-\helpref{DnD sample}{samplednd},
+\helpref{DnD sample}{samplednd}, 
-\helpref{wxFileDataObject}{wxfiledataobject},
+\helpref{wxFileDataObject}{wxfiledataobject}, 
-\helpref{wxTextDataObject}{wxtextdataobject},
+\helpref{wxTextDataObject}{wxtextdataobject}, 
 \helpref{wxBitmapDataObject}{wxbitmapdataobject}
 
 \latexignore{\rtfignore{\wxheading{Members}}}
@@ -99,4 +99,3 @@ the derived class if the object supports setting its data.
 \pythonnote{When implementing this method in wxPython, the data comes
 as a single string parameter rather than the two shown here.}
 
-

docs/latex/wx/document.tex

@@ -191,10 +191,15 @@ See also \helpref{Modify}{wxdocumentmodify}.
 
 \func{virtual istream\&}{LoadObject}{\param{istream\& }{stream}}
 
+\func{virtual wxInputStream\&}{LoadObject}{\param{wxInputStream\& }{stream}}
+
 Override this function and call it from your own LoadObject before
 streaming your own data. LoadObject is called by the framework
 automatically when the document contents need to be loaded.
 
+Note that only one of these forms exists, depending on how wxWindows
+was configured.
+
 \membersection{wxDocument::Modify}\label{wxdocumentmodify}
 
 \func{virtual void}{Modify}{\param{bool}{ modify}}
@@ -297,10 +302,15 @@ Prompts the user for a file to save to, and then calls OnSaveDocument.
 
 \func{virtual ostream\&}{SaveObject}{\param{ostream\& }{stream}}
 
+\func{virtual wxOutputStream\&}{SaveObject}{\param{wxOutputStream\& }{stream}}
+
 Override this function and call it from your own SaveObject before
 streaming your own data. SaveObject is called by the framework
 automatically when the document contents need to be saved.
 
+Note that only one of these forms exists, depending on how wxWindows
+was configured.
+
 \membersection{wxDocument::SetCommandProcessor}
 
 \func{virtual void}{SetCommandProcessor}{\param{wxCommandProcessor *}{processor}}

docs/latex/wx/dropsrc.tex

@@ -2,7 +2,7 @@
 
 This class represents a source for a drag and drop operation.
 
-See \helpref{Drag'n'Drop overview}{wxdndoverview} and \helpref{wxDataObject overview}{wxdataobjectoverview}
+See \helpref{Drag'n'Drop overview}{wxdndoverview} and \helpref{wxDataObject overview}{wxdataobjectoverview} 
 for more information.
 
 \wxheading{Derived from}
@@ -17,7 +17,7 @@ None
 
 \index{wxDragResult}wxDragResult is defined as follows:
 
-{\small\begin{verbatim}
+begin{verbatim}
 enum wxDragResult
 {
     wxDragError,    // error prevented the d&d operation from completing
@@ -27,7 +27,6 @@ enum wxDragResult
     wxDragCancel    // the operation was cancelled by user (not an error)
 };
 \end{verbatim}
-}
 
 \wxheading{See also}
 

docs/latex/wx/droptrgt.tex

@@ -26,7 +26,7 @@ None
 
 \index{wxDragResult}wxDragResult is defined as follows:
 
-{\small\begin{verbatim}
+\begin{verbatim}
 enum wxDragResult
 {
     wxDragError,    // error prevented the d&d operation from completing
@@ -36,7 +36,6 @@ enum wxDragResult
     wxDragCancel    // the operation was cancelled by user (not an error)
 };
 \end{verbatim}
-}
 
 \wxheading{See also}
 

docs/latex/wx/evthand.tex

@@ -37,7 +37,7 @@ each other.
 \func{virtual void}{AddPendingEvent}{\param{wxEvent\& }{event}}
 
 Adds an event to be processed later. The function will return immediately and the
-event will get processed in idle time using the \helpref{wxEvtHandler::ProcessEvent}{wxevthandlerprocessevent}
+event will get processed in idle time using the \helpref{wxEvtHandler::ProcessEvent}{wxevthandlerprocessevent} 
 method.
 
 \wxheading{Parameters}

docs/latex/wx/expr.tex

@@ -46,8 +46,8 @@ Construct a floating point expression.
 Construct a list expression. The list's nodes' data should
 themselves be {\bf wxExpr}s.
 
-The current version of this library no longer uses the {\bf wxList}
+wxExpr no longer uses the {\bf wxList} internally,
-internally, so this constructor turns the list into its internal
+so this constructor turns the list into its internal
 format (assuming a non-nested list) and then deletes the supplied
 list.
 
@@ -376,7 +376,6 @@ bool myErrorHandler(int err, chat *msg)
 wxExprDatabase database(myErrorHandler);
 \end{verbatim}
 
-
 \func{}{wxExprDatabase}{\param{wxExprType}{ type}, \param{const wxString\&}{attribute},
 \rtfsp\param{int}{ size = 500}, \param{proioErrorHandler}{ handler = 0}}
 

docs/latex/wx/fildatob.tex

@@ -1,8 +1,8 @@
 \section{\class{wxFileDataObject}}\label{wxfiledataobject}
 
 wxFileDataObject is a specialization of \helpref{wxDataObject}{wxdataobject} 
-for file names. The program works with it just as if it were a list of file
+for file names. The program works with it just as if it were a list of absolute file
-names (absolutep aths always), but internally it uses the same format as
+names, but internally it uses the same format as
 Explorer and other compatible programs under Windows or GNOME/KDE filemanager
 under Unix which makes it possible to receive files from them using this
 class.
@@ -30,7 +30,7 @@ None.
 \helpref{wxDataObject}{wxdataobject}, 
 \helpref{wxDataObjectSimple}{wxdataobjectsimple}, 
 \helpref{wxTextDataObject}{wxtextdataobject}, 
-\helpref{wxBitmapDataObject}{wxbitmapdataobject}
+\helpref{wxBitmapDataObject}{wxbitmapdataobject}, 
 \helpref{wxDataObject}{wxdataobject}
 
 \latexignore{\rtfignore{\wxheading{Members}}}

docs/latex/wx/file.tex

@@ -18,7 +18,6 @@ None.
 
 wx/file.h defines the following constants:
 
-{\small
 \begin{verbatim}
 #define wxS_IRUSR 00400
 #define wxS_IWUSR 00200
@@ -35,7 +34,6 @@ wx/file.h defines the following constants:
 // default mode for the new files: corresponds to umask 022
 #define wxS_DEFAULT  (wxS_IRUSR | wxS_IWUSR | wxS_IRGRP | wxS_IWGRP | wxS_IROTH | wxS_IWOTH)
 \end{verbatim}
-}
 
 These constants define the file access rights and are used with 
 \helpref{wxFile::Create}{wxfilecreate} and \helpref{wxFile::Open}{wxfileopen}.

docs/latex/wx/fltinstr.tex

@@ -21,6 +21,8 @@ from another stream and pass it to the requester.
 The interface of this class is the same as that of wxInputStream. Only a constructor
 differs and it is documented below.
 
+\latexignore{\rtfignore{\wxheading{Members}}}
+
 % -----------
 % ctor & dtor
 % -----------

docs/latex/wx/fltoutst.tex

@@ -22,6 +22,8 @@ stream.
 The use of this class is exactly the same as of wxOutputStream. Only a constructor
 differs and it is documented below.
 
+\latexignore{\rtfignore{\wxheading{Members}}}
+
 % -----------
 % ctor & dtor
 % -----------

docs/latex/wx/fontenum.tex

@@ -19,10 +19,9 @@ the given \helpref{encoding}{wxfontencodingoverview}.
 To do this, you just have to call one of EnumerateXXX() functions - either 
 \helpref{EnumerateFacenames}{wxfontenumeratorenumeratefacenames} or 
 \helpref{EnumerateEncodings}{wxfontenumeratorenumerateencodings} and the
-corresponding callback ( 
+corresponding callback (\helpref{OnFacename}{wxFontEnumeratoronfacename} or 
-\helpref{OnFacename}{wxFontEnumeratoronfacename} or
 \helpref{OnFontEncoding}{wxfontenumeratoronfontencoding}) will be called
-repeatedly until either all fonts (satisfying the specified criteria) are
+repeatedly until either all fonts satisfying the specified criteria are
 exhausted or the callback returns FALSE.
 
 \wxheading{Virtual functions to override}

docs/latex/wx/fontmap.tex

@@ -20,7 +20,7 @@ never TRUE, the config file is never created anyhow.
 
 In case everything else fails (i.e. there is no record in config file
 and "interactive" is FALSE or user denied to choose any replacement), 
-the class queries \helpref{wxEncodingConverter}{wxencodingconverter}
+the class queries \helpref{wxEncodingConverter}{wxencodingconverter} 
 for "equivalent" encodings (e.g. iso8859-2 and cp1250) and tries them.
 
 \wxheading{Global variables}
@@ -72,7 +72,6 @@ No base class
 \helpref{wxEncodingConverter}{wxencodingconverter}, 
 \helpref{Writing non-English applications}{nonenglishoverview}
 
-
 \latexignore{\rtfignore{\wxheading{Members}}}
 
 \membersection{wxFontMapper::wxFontMapper}\label{wxfontmapperwxfontmapper}
@@ -81,14 +80,12 @@ No base class
 
 Default ctor.
 
-
 \membersection{wxFontMapper::\destruct{wxFontMapper}}\label{wxfontmapperdtor}
 
 \func{}{\destruct{wxFontMapper}}{\void}
 
 Virtual dtor for a base class.
 
-
 \membersection{wxFontMapper::GetAltForEncoding}\label{wxfontmappergetaltforencoding}
 
 \func{bool}{GetAltForEncoding}{\param{wxFontEncoding }{encoding}, \param{wxNativeEncodingInfo* }{info}, \param{const wxString\& }{facename = wxEmptyString}, \param{bool }{interactive = TRUE}}
@@ -104,7 +101,6 @@ The first form is for wxWindows' internal use while the second one
 is better suitable for general use -- it returns wxFontEncoding which
 can consequently be passed to wxFont constructor.
 
-
 \membersection{wxFontMapper::IsEncodingAvailable}\label{wxfontmapperisencodingavailable}
 
 \func{bool}{IsEncodingAvailable}{\param{wxFontEncoding }{encoding}, \param{const wxString\& }{facename = wxEmptyString}}
@@ -112,7 +108,6 @@ can consequently be passed to wxFont constructor.
 Check whether given encoding is available in given face or not.
 If no facename is given, find {\it any} font in this encoding.
 
-
 \membersection{wxFontMapper::CharsetToEncoding}\label{wxfontmappercharsettoencoding}
 
 \func{wxFontEncoding}{CharsetToEncoding}{\param{const wxString\& }{charset}, \param{bool }{interactive = TRUE}}
@@ -120,36 +115,31 @@ If no facename is given, find {\it any} font in this encoding.
 Returns the encoding for the given charset (in the form of RFC 2046) or
 wxFONTENCODING\_SYSTEM if couldn't decode it.
 
-
 \membersection{wxFontMapper::GetEncodingName}\label{wxfontmappergetencodingname}
 
 \func{static wxString}{GetEncodingName}{\param{wxFontEncoding }{encoding}}
 
-Return internal string identifier for the encoding (see also
+Return internal string identifier for the encoding (see also 
 \helpref{GetEncodingDescription()}{wxfontmappergetencodingdescription})
 
-
 \membersection{wxFontMapper::GetEncodingDescription}\label{wxfontmappergetencodingdescription}
 
 \func{static wxString}{GetEncodingDescription}{\param{wxFontEncoding }{encoding}}
 
 Return user-readable string describing the given encoding.
 
-
 \membersection{wxFontMapper::SetDialogParent}\label{wxfontmappersetdialogparent}
 
 \func{void}{SetDialogParent}{\param{wxWindow* }{parent}}
 
 The parent window for modal dialogs.
 
-
 \membersection{wxFontMapper::SetDialogTitle}\label{wxfontmappersetdialogtitle}
 
 \func{void}{SetDialogTitle}{\param{const wxString\& }{title}}
 
 The title for the dialogs (note that default is quite reasonable).
 
-
 \membersection{wxFontMapper::SetConfig}\label{wxfontmappersetconfig}
 
 \func{void}{SetConfig}{\param{wxConfigBase* }{config}}

docs/latex/wx/frame.tex

@@ -235,7 +235,7 @@ Returns a pointer to the menubar currently associated with the frame (if any).
 
 \membersection{wxFrame::GetStatusBar}\label{wxframegetstatusbar}
 
-\func{wxStatusBar*}{GetStatusBar}{\void}
+\constfunc{wxStatusBar*}{GetStatusBar}{\void}
 
 Returns a pointer to the status bar currently associated with the frame (if any).
 
@@ -245,14 +245,13 @@ Returns a pointer to the status bar currently associated with the frame (if any)
 
 \membersection{wxFrame::GetTitle}\label{wxframegettitle}
 
-\func{wxString\&}{GetTitle}{\void}
+\constfunc{wxString}{GetTitle}{\void}
 
-Gets a temporary pointer to the frame title. See
+Gets a string containing the frame title. See \helpref{wxFrame::SetTitle}{wxframesettitle}.
-\helpref{wxFrame::SetTitle}{wxframesettitle}.
 
 \membersection{wxFrame::GetToolBar}\label{wxframegettoolbar}
 
-\func{wxToolBar*}{GetToolBar}{\void}
+\constfunc{wxToolBar*}{GetToolBar}{\void}
 
 Returns a pointer to the toolbar currently associated with the frame (if any).
 
@@ -263,7 +262,7 @@ Returns a pointer to the toolbar currently associated with the frame (if any).
 
 \membersection{wxFrame::Iconize}\label{wxframeiconize}
 
-\func{void}{Iconize}{\param{const bool}{ iconize}}
+\func{void}{Iconize}{\param{bool}{ iconize}}
 
 Iconizes or restores the frame. Windows only.
 
@@ -289,13 +288,13 @@ Returns TRUE if the frame is maximized.
 
 \membersection{wxFrame::Maximize}\label{wxframemaximize}
 
-\func{void}{Maximize}{\param{const bool }{maximize}}
+\func{void}{Maximize}{\param{bool }{maximize}}
 
 Maximizes or restores the frame.
 
 \wxheading{Parameters}
 
-\docparam{maximize}{If TRUE, maximizes the frame, otherwise it restores it}.
+\docparam{maximize}{If TRUE, maximizes the frame, otherwise it restores it.}
 
 \wxheading{Remarks}
 

docs/latex/wx/fsfile.tex

@@ -10,7 +10,7 @@ It provides more information than wxWindow's input stream
 (stream, filename, mime type, anchor).
 
 {\bf Note:} Any pointer returned by wxFSFile's member is valid
-only as long as wxFSFile object exits. For example call to GetStream()
+only as long as wxFSFile object exists. For example a call to GetStream()
 doesn't {\it create} the stream but only returns the pointer to it. In
 other words after 10 calls to GetStream() you'll obtain ten identical
 pointers.
@@ -26,7 +26,7 @@ pointers.
 \wxheading{See Also}
 
 \helpref{wxFileSystemHandler}{wxfilesystemhandler}, 
-\helpref{wxFileSystem}{wxfilesystem},
+\helpref{wxFileSystem}{wxfilesystem}, 
 \helpref{Overview}{fs}
 
 \latexignore{\rtfignore{\wxheading{Members}}}
@@ -47,17 +47,17 @@ Constructor. You probably won't use it. See Notes for details.
 
 \docparam{anchor}{Anchor. See \helpref{GetAnchor()}{wxfsfilegetanchor} for details.}
 
-If you aren't sure what do these params mean see description of GetXXXX()
+If you are not sure of the meaning of these params, see the description of the GetXXXX()
 functions.
 
 \wxheading{Notes}
 
-It is never used by end user but you'll need it if
+It is seldom used by the application programmer but you'll need it if
-you're writing own virtual FS. For example you may need something
+you are writing your own virtual FS. For example you may need something
-similar to wxMemoryInputStream but because wxMemoryInputStream
+similar to wxMemoryInputStream, but because wxMemoryInputStream
-doesn't free the memory when destroyed and thus passing memory stream
+doesn't free the memory when destroyed and thus passing a memory stream
 pointer into wxFSFile constructor would lead to memory leaks, you
-can write your own class derived from wxFSFile :
+can write your own class derived from wxFSFile:
 
 \begin{verbatim}
 class wxMyFSFile : public wxFSFile
@@ -85,10 +85,10 @@ archive/main.zip#zip:index.htm#global /* 'global'           */
 archive/main.zip#zip:index.htm        /* NO anchor here!    */
 \end{verbatim}
 
-Usually anchor is presented only if mime type is 'text/html'.
+Usually an anchor is presented only if the MIME type is 'text/html'.
-But it may have some meaning with other files
+But it may have some meaning with other files;
-(for example myanim.avi\#200 may refer to position in animation
+for example myanim.avi\#200 may refer to position in animation
-or reality.wrl\#MyView may refer to predefined view in VRML)
+or reality.wrl\#MyView may refer to a predefined view in VRML.
 
 \membersection{wxFSFile::GetLocation}\label{wxfsfilegetlocation}
 
@@ -108,7 +108,7 @@ relative-file.htm
 
 \constfunc{const wxString\&}{GetMimeType}{\void}
 
-Returns MIME type of the content of this file. It is either
+Returns the MIME type of the content of this file. It is either
 extension-based (see wxMimeTypesManager) or extracted from
 HTTP protocol Content-Type header.
 
@@ -125,7 +125,7 @@ Returns time when this file was modified.
 Returns pointer to the stream. You can use the returned
 stream to directly access data. You may suppose
 that the stream provide Seek and GetSize functionality
-(even in case of HTTP protocol which doesn't provide
+(even in the case of the HTTP protocol which doesn't provide
-this by default. wxHtml is using local cache to workaround
+this by default. wxHtml uses local cache to work around
-this and to speed up connection)
+this and to speed up the connection).
 

docs/latex/wx/ftp.tex

@@ -27,7 +27,7 @@ the expected result.
 
 \wxheading{Return value}
 
-TRUE, if the command has been sent successfully, else FALSE.
+TRUE if the command has been sent successfully, else FALSE.
 
 % ----------------------------------------------------------------------------
 
@@ -172,10 +172,10 @@ An initialized write-only stream.
 
 \func{wxInputStream *}{GetInputStream}{\param{const wxString\&}{ path}}
 
-Creates a new input stream on the the specified path. You can use all but seek
+Creates a new input stream on the the specified path. You can use all but the seek
-functionnality of wxStream. Seek isn't available on all stream. For example,
+functionality of wxStream. Seek isn't available on all streams. For example,
-http or ftp streams doesn't deal with it. Other functions like Tell
+http or ftp streams do not deal with it. Other functions like Tell
-aren't available for the moment for this sort of stream.
+are not available for this sort of stream, at present.
 You will be notified when the EOF is reached by an error.
 
 \wxheading{Return value}
@@ -183,10 +183,10 @@ You will be notified when the EOF is reached by an error.
 Returns NULL if an error occured (it could be a network failure or the fact
 that the file doesn't exist).
 
-Returns the initialized stream. You will have to delete it yourself once you
+Returns the initialized stream. You will have to delete it yourself when you
-don't use it anymore. The destructor close the DATA stream connection but
+don't need it anymore. The destructor closes the DATA stream connection but
-will leave the COMMAND stream connection opened. It means that you still
+will leave the COMMAND stream connection opened. It means that you can still
-can send new commands without reconnecting.
+send new commands without reconnecting.
 
 \wxheading{Example of a standalone connection (without wxURL)}
 

docs/latex/wx/function.tex

@@ -730,10 +730,10 @@ wxCANCEL.}
 wxYES\_NO or wxOK.}
 \twocolitem{wxOK}{Puts an Ok button on the message box. May be combined with wxCANCEL.}
 \twocolitem{wxCENTRE}{Centres the text.}
-\twocolitem{wxICON\_EXCLAMATION}{Under Windows, displays an exclamation mark symbol.}
+\twocolitem{wxICON\_EXCLAMATION}{Displays an exclamation mark symbol.}
-\twocolitem{wxICON\_HAND}{Under Windows, displays a hand symbol.}
+\twocolitem{wxICON\_HAND}{Displays a hand symbol.}
-\twocolitem{wxICON\_QUESTION}{Under Windows, displays a question mark symbol.}
+\twocolitem{wxICON\_QUESTION}{Displays a question mark symbol.}
-\twocolitem{wxICON\_INFORMATION}{Under Windows, displays an information symbol.}
+\twocolitem{wxICON\_INFORMATION}{Displays an information symbol.}
 \end{twocollist}
 
 The return value is one of: wxYES, wxNO, wxCANCEL, wxOK.

docs/latex/wx/grid.tex

@@ -2,6 +2,10 @@
 
 wxGrid is a class for displaying and editing tabular information.
 
+{\bf Note:} there is a new grid implementation from wxWindows 2.1.14,
+with an API that is backwardly compatible with the one documented here.
+This documentation is awaiting updates for the new and improved API.
+
 \wxheading{Derived from}
 
 \helpref{wxPanel}{wxpanel}\\
@@ -338,7 +342,7 @@ Returns the row scroll position.
 
 \membersection{wxGrid::GetTextItem}\label{wxgridgettextitem}
 
-\constfunc{wxText *}{GetTextItem}{\void}
+\constfunc{wxTextCtrl *}{GetTextItem}{\void}
 
 Returns a pointer to the text item used for entering text into a cell.
 
@@ -382,7 +386,7 @@ and rows numerically.
 \func{void}{OnChangeSelectionLabel}{\void}
 
 Called when a cell is selected, to allow the application an
-opportunity to update the selection label (the label of the wxText item
+opportunity to update the selection label (the label of the wxTextCtrl
 used for entering cell text). By default, the cell column letter and row
 number are concatenated to form the selection label.
 

docs/latex/wx/helpinst.tex

@@ -33,11 +33,10 @@ There are currently the following help controller classes defined:
 \item wxWinHelpController, for controlling Windows Help.
 \item wxExtHelpController, for controlling external browsers under Unix.
 The default browser is Netscape Navigator. The 'help' sample shows its use.
-\item wxHelpControllerHtml, using \helpref{wxHTML}{wxhtml} to display help. The API for this class
+\item wxHelpControllerHtml, using \helpref{wxHTML}{wxhtml} to display help. See {\tt wx/helpwxht.h} for
-is reasonably close to the wxWindows help controller API; see {\tt wx/helpwxht.h} for
 details of use.
 \item \helpref{wxHtmlHelpController}{wxhtmlhelpcontroller}, a more sophisticated help controller using \helpref{wxHTML}{wxhtml}, in
-a similar style to the Windows HTML Help viewer and using some of the same files.
+a similar style to the Microsoft HTML Help viewer and using some of the same files.
 Although it has an API compatible with other help controllers, it has more advanced features, so it is
 recommended that you use the specific API for this class instead.
 \end{itemize}
@@ -80,8 +79,8 @@ Destroys the help instance, closing down the viewer if it is running.
 
 \func{virtual void}{Initialize}{\param{const wxString\& }{file}, \param{int}{ server}}
 
-Initializes the help instance with a help filename, and optionally a server (socket)
+Initializes the help instance with a help filename, and optionally a server socket
-number if using wxHelp. Does not invoke the help viewer.
+number if using wxHelp (now obsolete). Does not invoke the help viewer.
 This must be called directly after the help instance object is created and before
 any attempts to communicate with the viewer.
 

docs/latex/wx/htcell.tex

@@ -186,10 +186,10 @@ Returns width of the cell (m\_Width member).
 
 \func{virtual void}{Layout}{\param{int }{w}}
 
-This method performs 2 actions:
+This method performs two actions:
 
 \begin{enumerate}\itemsep=0pt
-\item adjusts cell's width according to the fact that maximal possible width is {\it w}.
+\item adjusts the cell's width according to the fact that maximal possible width is {\it w}.
 (this has sense when working with horizontal lines, tables etc.)
 \item prepares layout (=fill-in m\_PosX, m\_PosY (and sometimes m\_Height) members)
 based on actual width {\it w}
@@ -203,7 +203,7 @@ before calling Layout.
 
 \func{virtual void}{OnMouseClick}{\param{wxWindow* }{parent}, \param{int}{x}, \param{int }{y}, \param{const wxMouseEvent\& }{event}}
 
-This function is simple event handler. Each time user clicks mouse button over a cell
+This function is simple event handler. Each time the user clicks mouse button over a cell
 within \helpref{wxHtmlWindow}{wxhtmlwindow} this method of that cell is called. Default behavior is
 that it calls \helpref{wxHtmlWindow::LoadPage}{wxhtmlwindowloadpage}.
 
@@ -233,7 +233,7 @@ is \helpref{wxHtmlLinkInfo}{wxhtmllinkinfo}("", "") (no link))
 \func{void}{SetNext}{\param{wxHtmlCell }{*cell}}
 
 Sets the next cell in the list. This shouldn't be called by user - it is
-to be used only by \helpref{wxHtmlContainerCell::InsertCell}{wxhtmlcontainercellinsertcell}
+to be used only by \helpref{wxHtmlContainerCell::InsertCell}{wxhtmlcontainercellinsertcell}.
 
 \membersection{wxHtmlCell::SetParent}\label{wxhtmlcellsetparent}
 

docs/latex/wx/htcolor.tex

@@ -5,7 +5,7 @@
 
 \section{\class{wxHtmlColourCell}}\label{wxhtmlcolourcell}
 
-This cell changes color of either background or foreground. 
+This cell changes the colour of either the background or the foreground. 
 
 \wxheading{Derived from}
 

docs/latex/wx/htcontnr.tex

@@ -59,7 +59,7 @@ instead.
 
 Returns the indentation. {\it ind} is one of the {\bf wxHTML\_INDENT\_*} constants.
 
-{\bf Note:} You must call \helpref{GetIndentUnits}{wxhtmlcontainercellgetindentunits}
+{\bf Note:} You must call \helpref{GetIndentUnits}{wxhtmlcontainercellgetindentunits} 
 with same {\it ind} parameter in order to correctly interpret the returned integer value.
 It is NOT always in pixels!
 
@@ -82,14 +82,14 @@ Inserts new cell into the container.
 
 Sets the container's alignment (both horizontal and vertical) according to
 the values stored in {\it tag}. (Tags {\tt ALIGN} parameter is extracted.) In fact
-it is only a front-end to \helpref{SetAlignHor}{wxhtmlcontainercellsetalignhor}
+it is only a front-end to \helpref{SetAlignHor}{wxhtmlcontainercellsetalignhor} 
 and \helpref{SetAlignVer}{wxhtmlcontainercellsetalignver}.
 
 \membersection{wxHtmlContainerCell::SetAlignHor}\label{wxhtmlcontainercellsetalignhor}
 
 \func{void}{SetAlignHor}{\param{int }{al}}
 
-Sets the container's {\it horizontal alignment}. During \helpref{Layout}{wxhtmlcelllayout}
+Sets the container's {\it horizontal alignment}. During \helpref{Layout}{wxhtmlcelllayout} 
 each line is aligned according to {\it al} value.
 
 \wxheading{Parameters}
@@ -127,19 +127,19 @@ Sets the container's {\it vertical alignment}. This is per-line alignment!
 
 \func{void}{SetBackgroundColour}{\param{const wxColour\& }{clr}}
 
-Sets the background color for this container.
+Sets the background colour for this container.
 
 \membersection{wxHtmlContainerCell::SetBorder}\label{wxhtmlcontainercellsetborder}
 
 \func{void}{SetBorder}{\param{const wxColour\& }{clr1}, \param{const wxColour\& }{clr2}}
 
-Sets the border (frame) colours. Border is rectangle around the container.
+Sets the border (frame) colours. A border is a rectangle around the container.
 
 \wxheading{Parameters}
 
-\docparam{clr1}{Color of top and left lines}
+\docparam{clr1}{Colour of top and left lines}
 
-\docparam{clr2}{Color of bottom and right lines}
+\docparam{clr2}{Colour of bottom and right lines}
 
 \membersection{wxHtmlContainerCell::SetIndent}\label{wxhtmlcontainercellsetindent}
 
@@ -194,8 +194,8 @@ much smaller area.
 
 \docparam{align}{If height of the container is lower than the minimum height, empty space must be inserted
 somewhere in order to ensure minimal height. This parameter is one of {\bf wxHTML\_ALIGN\_TOP,
-wxHTML\_ALIGN\_BOTTOM, wxHTML\_ALIGN\_CENTER} constants. It refers to the {\it contents}, not to the
+wxHTML\_ALIGN\_BOTTOM, wxHTML\_ALIGN\_CENTER}. It refers to the {\it contents}, not to the
-empty place!}
+empty place.}
 
 \membersection{wxHtmlContainerCell::SetWidthFloat}\label{wxhtmlcontainercellsetwidthfloat}
 

docs/latex/wx/hthelpct.tex

@@ -5,9 +5,9 @@
 
 \section{\class{wxHtmlHelpController}}\label{wxhtmlhelpcontroller}
 
-{\bf WARNING! Although this class has an API compatible with other wxWindows
+{\bf WARNING!} Although this class has an API compatible with other wxWindows
 help controllers as documented by \helpref{wxHelpController}{wxhelpcontroller}, it
-is recommended that you use the enhanced capabilities of wxHtmlHelpController's API.}
+is recommended that you use the enhanced capabilities of wxHtmlHelpController's API.
 
 This help controller provides an easy way of displaying HTML help in your
 application (see {\it test} sample). The help system is based on {\bf books} 

docs/latex/wx/htlnkinf.tex

@@ -2,7 +2,7 @@
 
 This class stores all neccessary information about hypertext
 links (as represented by {\tt <A>} tag in HTML documents). In 
-current implementation it stores URL and target frame name.
+current implementation it stores URL and target frame name. 
 {\it Note that frames are not currently supported by wxHTML!}
 
 \wxheading{Derived from}

docs/latex/wx/htparser.tex

@@ -30,7 +30,6 @@ wxObject
 
 <wx/html/htmlpars.h>
 
-
 \wxheading{See also}
 
 \helpref{Cells Overview}{cells},

docs/latex/wx/htwindow.tex

@@ -13,7 +13,7 @@ The purpose of this class is to display HTML pages (either local
 file or downloaded via HTTP protocol) in a window. The width
 of the window is constant - given in the constructor - and virtual height
 is changed dynamically depending on page size.
-Once the window is created you can set its content by calling
+Once the window is created you can set its content by calling 
 \helpref{SetPage(text)}{wxhtmlwindowsetpage} or 
 \helpref{LoadPage(filename)}{wxhtmlwindowloadpage}. 
 

docs/latex/wx/htwinprs.tex

@@ -3,25 +3,21 @@
 % htmlwinparser.tex at 14/Mar/99 20:13:37
 %
 
-
 \section{\class{wxHtmlWinParser}}\label{wxhtmlwinparser}
 
 This class is derived from \helpref{wxHtmlParser}{wxhtmlparser} and
 its mail goal is to parse HTML input so that it can be displayed in
-\helpref{wxHtmlWindow}{wxhtmlwindow}. It uses special
+\helpref{wxHtmlWindow}{wxhtmlwindow}. It uses a special 
 \helpref{wxHtmlWinTagHandler}{wxhtmlwintaghandler}.
 
 \wxheading{Notes}
 
-\begin{enumerate}
+The product of parsing is a wxHtmlCell (resp. wxHtmlContainer) object.
-\item Product of parsing is wxHtmlCell (resp. wxHtmlContainer) object.
-\end{enumerate}
 
 \wxheading{Derived from}
 
 \helpref{wxHtmlParser}{wxhtmlparser}
 
-
 \wxheading{Include files}
 
 <wx/html/winpars.h>
@@ -58,21 +54,21 @@ and returns pointer to it (see \helpref{Overview}{cells}).
 
 \func{virtual wxFont*}{CreateCurrentFont}{\void}
 
-Creates font based on current setting (see
+Creates font based on current setting (see 
-\helpref{SetFontSize}{wxhtmlwinparsersetfontsize},
+\helpref{SetFontSize}{wxhtmlwinparsersetfontsize}, 
-\helpref{SetFontBold}{wxhtmlwinparsersetfontbold},
+\helpref{SetFontBold}{wxhtmlwinparsersetfontbold}, 
-\helpref{SetFontItalic}{wxhtmlwinparsersetfontitalic},
+\helpref{SetFontItalic}{wxhtmlwinparsersetfontitalic}, 
-\helpref{SetFontFixed}{wxhtmlwinparsersetfontfixed},
+\helpref{SetFontFixed}{wxhtmlwinparsersetfontfixed}, 
 \helpref{SetFontUnderlined}{wxhtmlwinparsersetfontunderlined})
 and returns pointer to it.
-(If the font was already created only a pointer is returned.)
+If the font was already created only a pointer is returned.
 
 
 \membersection{wxHtmlWinParser::GetActualColor}\label{wxhtmlwinparsergetactualcolor}
 
 \constfunc{const wxColour\&}{GetActualColor}{\void}
 
-Returns actual text color.
+Returns actual text colour.
 
 \membersection{wxHtmlWinParser::GetAlign}\label{wxhtmlwinparsergetalign}
 
@@ -86,7 +82,7 @@ Returns default horizontal alignment.
 
 Returns (average) char height in standard font. It's used as DC-independent metrics.
 
-{\bf Note:} This function doesn't return {\it actual} height. If you want to
+{\bf Note:} This function doesn't return the {\it actual} height. If you want to
 know the height of the current font, call {\tt GetDC -> GetCharHeight()}.
 
 \membersection{wxHtmlWinParser::GetCharWidth}\label{wxhtmlwinparsergetcharwidth}
@@ -95,7 +91,7 @@ know the height of the current font, call {\tt GetDC -> GetCharHeight()}.
 
 Returns average char width in standard font. It's used as DC-independent metrics.
 
-{\bf Note:} This function doesn't return {\it actual} width. If you want to
+{\bf Note:} This function doesn't return the {\it actual} width. If you want to
 know the height of the current font, call {\tt GetDC -> GetCharWidth()}
 
 \membersection{wxHtmlWinParser::GetContainer}\label{wxhtmlwinparsergetcontainer}
@@ -115,13 +111,12 @@ m_WParser -> GetContainer() -> InsertCell(new ...);
 
 Returns pointer to the DC used during parsing.
 
-
 \membersection{wxHtmlWinParser::GetEncodingConverter}\label{wxhtmlwinparsergetencodingconverter}
 
 \constfunc{wxEncodingConverter *}{GetEncodingConverter}{\void}
 
 Returns \helpref{wxEncodingConverter}{wxencodingconverter} class used
-to do conversion between \helpref{input encoding}{wxhtmlwinparsergetinputencoding}
+to do conversion between \helpref{input encoding}{wxhtmlwinparsergetinputencoding} 
 and \helpref{output encoding}{wxhtmlwinparsergetoutputencoding}.
 
 \membersection{wxHtmlWinParser::GetFontBold}\label{wxhtmlwinparsergetfontbold}
@@ -136,7 +131,6 @@ Returns TRUE if actual font is bold, FALSE otherwise.
 
 Returns actual font face name.
 
-
 \membersection{wxHtmlWinParser::GetFontFixed}\label{wxhtmlwinparsergetfontfixed}
 
 \constfunc{int}{GetFontFixed}{\void}
@@ -149,7 +143,6 @@ Returns TRUE if actual font is fixed face, FALSE otherwise.
 
 Returns TRUE if actual font is italic, FALSE otherwise.
 
-
 \membersection{wxHtmlWinParser::GetFontSize}\label{wxhtmlwinparsergetfontsize}
 
 \constfunc{int}{GetFontSize}{\void}
@@ -168,23 +161,20 @@ Returns TRUE if actual font is underlined, FALSE otherwise.
 
 Returns input encoding.
 
-
 \membersection{wxHtmlWinParser::GetLink}\label{wxhtmlwinparsergetlink}
 
 \constfunc{const wxHtmlLinkInfo\&}{GetLink}{\void}
 
-Returns actual hypertext link. (This value has non-empty
+Returns actual hypertext link. (This value has a non-empty 
 \helpref{Href}{wxhtmllinkinfogethref} string
 if the parser is between {\tt <A>} and {\tt </A>} tags,
 wxEmptyString otherwise.)
 
-
 \membersection{wxHtmlWinParser::GetLinkColor}\label{wxhtmlwinparsergetlinkcolor}
 
 \constfunc{const wxColour\&}{GetLinkColor}{\void}
 
-Returns color of hypertext link text.
+Returns the colour of hypertext link text.
-
 
 \membersection{wxHtmlWinParser::GetOutputEncoding}\label{wxhtmlwinparsergetoutputencoding}
 
@@ -201,37 +191,33 @@ Returns associated window (wxHtmlWindow). This may be NULL! (You should always
 test if it is non-NULL. For example {\tt TITLE} handler sets window
 title only if some window is associated, otherwise it does nothing)
 
-
 \membersection{wxHtmlWinParser::OpenContainer}\label{wxhtmlwinparseropencontainer}
 
 \func{wxHtmlContainerCell*}{OpenContainer}{\void}
 
 Opens new container and returns pointer to it (see \helpref{Overview}{cells}).
 
-
 \membersection{wxHtmlWinParser::SetActualColor}\label{wxhtmlwinparsersetactualcolor}
 
 \func{void}{SetActualColor}{\param{const wxColour\& }{clr}}
 
-Sets actual text color. Note: this DOESN'T change the color!
+Sets actual text colour. Note: this DOESN'T change the colour!
 You must create \helpref{wxHtmlColourCell}{wxhtmlcolourcell} yourself.
 
 \membersection{wxHtmlWinParser::SetAlign}\label{wxhtmlwinparsersetalign}
 
 \func{void}{SetAlign}{\param{int }{a}}
 
-Sets default horizontal alignment (see
+Sets default horizontal alignment (see 
 \helpref{wxHtmlContainerCell::SetAlignHor}{wxhtmlcontainercellsetalignhor}.)
 Alignment of newly opened container is set to this value.
 
-
 \membersection{wxHtmlWinParser::SetContainer}\label{wxhtmlwinparsersetcontainer}
 
 \func{wxHtmlContainerCell*}{SetContainer}{\param{wxHtmlContainerCell *}{c}}
 
 Allows you to directly set opened container. This is not recommended - you should use OpenContainer
-whereever possible.
+wherever possible.
-
 
 \membersection{wxHtmlWinParser::SetDC}\label{wxhtmlwinparsersetdc}
 
@@ -243,7 +229,6 @@ DCs (e.g. printer) to adjust size of pixel metrics. (Many dimensions in
 HTML are given in pixels -- e.g. image sizes. 300x300 image would be only one
 inch wide on typical printer. With pixel\_scale = 3.0 it would be 3 inches.)
 
-
 \membersection{wxHtmlWinParser::SetFontBold}\label{wxhtmlwinparsersetfontbold}
 
 \func{void}{SetFontBold}{\param{int }{x}}
@@ -270,7 +255,6 @@ Sets fixed face flag of actualfont. {\it x} is either TRUE of FALSE.
 
 Sets italic flag of actualfont. {\it x} is either TRUE of FALSE.
 
-
 \membersection{wxHtmlWinParser::SetFontSize}\label{wxhtmlwinparsersetfontsize}
 
 \func{void}{SetFontSize}{\param{int }{s}}
@@ -289,7 +273,6 @@ Sets underlined flag of actualfont. {\it x} is either TRUE of FALSE.
 
 Sets fonts. This method is identical to \helpref{wxHtmlWindow::SetFonts}{wxhtmlwindowsetfonts}
 
-
 \membersection{wxHtmlWinParser::SetInputEncoding}\label{wxhtmlwinparsersetinputencoding}
 
 \func{void}{SetInputEncoding}{\param{wxFontEncoding }{enc}}
@@ -298,7 +281,6 @@ Sets input encoding. The parser uses this information to build conversion
 tables from document's encoding to some encoding supported by operating
 system.
 
-
 \membersection{wxHtmlWinParser::SetLink}\label{wxhtmlwinparsersetlink}
 
 \func{void}{SetLink}{\param{const wxHtmlLinkInfo\& }{link}}
@@ -311,6 +293,5 @@ to wxEmptyString.
 
 \func{void}{SetLinkColor}{\param{const wxColour\& }{clr}}
 
-Sets color of hypertext link.
+Sets colour of hypertext link.
-
 

docs/latex/wx/icon.tex

@@ -74,6 +74,8 @@ Creates an icon from an array of bits.
 
 Creates a new icon.
 
+\func{}{wxIcon}{\param{char**}{ bits}}
+
 \func{}{wxIcon}{\param{const char**}{ bits}}
 
 Creates an icon from XPM data.

docs/latex/wx/image.tex

@@ -18,7 +18,7 @@ creation of a \helpref{wxMask}{wxmask} object associated to the bitmap object.
 
 The following image handlers are available. {\bf wxBMPHandler} is always
 installed by default. To use other image formats, install the appropiate
-handler with \helpref{wxImage::AddHandler}{wximageaddhandler} or
+handler with \helpref{wxImage::AddHandler}{wximageaddhandler} or 
 \helpref{wxInitAllImageHandlers}{wxinitallimagehandlers}.
 
 \twocolwidtha{5cm}%
@@ -116,8 +116,8 @@ Loads an image from an input stream.
 
 Depending on how wxWindows has been configured, not all formats may be available.
 
-Note : any handler other than BMP must be previously
+Note: any handler other than BMP must be previously
-initialized with \helpref{wxImage::AddHandler}{wximageaddhandler} or
+initialized with \helpref{wxImage::AddHandler}{wximageaddhandler} or 
 \helpref{wxInitAllImageHandlers}{wxinitallimagehandlers}.
 
 \wxheading{See also}
@@ -331,7 +331,7 @@ the user.
 
 \wxheading{See also}
 
-\helpref{wxImageHandler}{wximagehandler}
+\helpref{wxImageHandler}{wximagehandler}, 
 \helpref{wxInitAllImageHandlers}{wxinitallimagehandlers}
 
 \membersection{wxImage::InsertHandler}
@@ -653,7 +653,7 @@ created by IJG.)
 
 \wxheading{See also}
 
-\helpref{wxImage}{wximage}
+\helpref{wxImage}{wximage}, 
 \helpref{wxInitAllImageHandlers}{wxinitallimagehandlers}
 
 \latexignore{\rtfignore{\wxheading{Members}}}
@@ -733,8 +733,8 @@ TRUE if the operation succeeded, FALSE otherwise.
 
 \wxheading{See also}
 
-\helpref{wxImage::LoadFile}{wximageloadfile}\\
+\helpref{wxImage::LoadFile}{wximageloadfile}, 
-\helpref{wxImage::SaveFile}{wximagesavefile}\\
+\helpref{wxImage::SaveFile}{wximagesavefile}, 
 \helpref{wxImageHandler::SaveFile}{wximagehandlersavefile}
 
 \membersection{wxImageHandler::SaveFile}\label{wximagehandlersavefile}
@@ -755,8 +755,8 @@ TRUE if the operation succeeded, FALSE otherwise.
 
 \wxheading{See also}
 
-\helpref{wxImage::LoadFile}{wximageloadfile}\\
+\helpref{wxImage::LoadFile}{wximageloadfile}, 
-\helpref{wxImage::SaveFile}{wximagesavefile}\\
+\helpref{wxImage::SaveFile}{wximagesavefile}, 
 \helpref{wxImageHandler::LoadFile}{wximagehandlerloadfile}
 
 \membersection{wxImageHandler::SetName}

docs/latex/wx/inputstr.tex

@@ -13,6 +13,8 @@ wxInputStream is an abstract base class which may not be used directly.
 
 <wx/stream.h>
 
+\latexignore{\rtfignore{\wxheading{Members}}}
+
 % -----------
 % ctor & dtor
 % -----------

docs/latex/wx/listctrl.tex

@@ -157,8 +157,7 @@ Deletes all the items in the list control.
 
 {\bf NB:} This function does {\it not} send the 
 {\tt wxEVT\_COMMAND\_LIST\_DELETE\_ITEM} event because deleting many items
-from the control would be too slow then (unlike 
+from the control would be too slow then (unlike \helpref{DeleteItem}{wxlistctrldeleteitem}).
-        \helpref{DeleteItem}{wxlistctrldeleteitem})
 
 \membersection{wxListCtrl::DeleteColumn}\label{wxlistctrldeletecolumn}
 
@@ -331,6 +330,7 @@ Returns the first item with given state following {\it item} or -1 if
 no such item found.
 
 This function may be used to find all selected items in the control like this:
+
 \begin{verbatim}
     long item = -1;
     for ( ;; )
@@ -413,7 +413,7 @@ wxLIST\_HITTEST\_ONITEMSTATEICON.}
 \end{twocollist}
 
 \pythonnote{A tuple of values is returned in the wxPython version of
-thsi method.  The first value is the item id and the second is the
+this method. The first value is the item id and the second is the
 flags value mentioned above.}
 
 \membersection{wxListCtrl::InsertColumn}\label{wxlistctrlinsertcolumn}

docs/latex/wx/log.tex

@@ -80,17 +80,21 @@ current mask while a message using string mask will be logged simply if the
 mask had been added before to the list of allowed ones.
 
 For example,
+
 \begin{verbatim}
 // wxTraceOleCalls is one of standard bit masks
 wxLogTrace(wxTraceRefCount | wxTraceOleCalls, "Active object ref count: %d", nRef);
 \end{verbatim}
 will do something only if the current trace mask contains both 
 {\tt wxTraceRefCount} and {\tt wxTraceOle}, but
+
 \begin{verbatim}
 // wxTRACE_OleCalls is one of standard string masks
 wxLogTrace(wxTRACE_OleCalls, "IFoo::Bar() called");
 \end{verbatim}
+
 will log the message if it was preceded by
+
 \begin{verbatim}
 wxLog::AddTraceMask(wxTRACE_OleCalls);
 \end{verbatim}

docs/latex/wx/menu.tex

@@ -254,7 +254,7 @@ Second form: returns the menu item object, or NULL if it is not found.
 Any special menu codes are stripped out of source and target strings
 before matching.
 
-\pythonnote{The name of this method in wxPython is {\tt FindItemById}
+\pythonnote{The name of this method in wxPython is {\tt FindItemById} 
 and it does not support the second parameter.}
 
 \membersection{wxMenu::GetHelpString}\label{wxmenugethelpstring}
@@ -706,8 +706,8 @@ Returns the number of menus in this menubar.
 \func{bool}{Insert}{\param{size\_t }{pos}, \param{wxMenu *}{menu}, \param{const wxString\& }{title}}
 
 Inserts the menu at the given position into the menu bar. Inserting menu at
-position $0$ will insert it in the very beginning of it, inserting at position
+position $0$ will insert it in the very beginning of it, inserting at position 
-\helpref{GetMenuCount()}{wxmenubargetmenucount} is the same as calling
+\helpref{GetMenuCount()}{wxmenubargetmenucount} is the same as calling 
 \helpref{Append()}{wxmenubarappend}.
 
 \wxheading{Parameters}
@@ -765,7 +765,7 @@ Redraw the menu bar
 \func{wxMenu *}{Remove}{\param{size\_t }{pos}}
 
 Removes the menu from the menu bar and returns the menu object - the caller is
-reposnbile for deleting it. This function may be used together with
+reposnbile for deleting it. This function may be used together with 
 \helpref{wxMenuBar::Insert}{wxmenubarinsert} to change the menubar
 dynamically.
 
@@ -777,7 +777,7 @@ dynamically.
 
 \func{wxMenu *}{Replace}{\param{size\_t }{pos}, \param{wxMenu *}{menu}, \param{const wxString\& }{title}}
 
-Replaces the menu at givenm position with another one.
+Replaces the menu at the given position with another one.
 
 \wxheading{Parameters}
 

docs/latex/wx/menuitem.tex

@@ -104,7 +104,7 @@ characaters it might contain.
 
 \wxheading{See also}
 
-\helpref{GetText}{wxmenuitemgettext},
+\helpref{GetText}{wxmenuitemgettext}, 
 \helpref{GetLabelFromText}{wxmenuitemgetlabelfromtext}
 
 \membersection{wxMenuItem::GetLabelFromText}\label{wxmenuitemgetlabelfromtext}
@@ -122,7 +122,7 @@ will return just {\tt "Hello"}.
 
 \wxheading{See also}
 
-\helpref{GetText}{wxmenuitemgettext},
+\helpref{GetText}{wxmenuitemgettext}, 
 \helpref{GetLabel}{wxmenuitemgetlabel}
 
 \membersection{wxMenuItem::GetMarginWidth}\label{wxmenuitemgetmarginwidth}
@@ -150,7 +150,7 @@ wxMenuItem constructor, i.e. with any accelerator characters it may contain.
 
 \wxheading{See also}
 
-\helpref{GetLabel}{wxmenuitemgetlabel},
+\helpref{GetLabel}{wxmenuitemgetlabel}, 
 \helpref{GetLabelFromText}{wxmenuitemgetlabelfromtext}
 
 \membersection{wxMenuItem::GetSubMenu}\label{wxmenuitemgetsubmenu}
@@ -233,9 +233,3 @@ Sets the text associated with the menu item.
 
 Sets the text colour associated with the menu item (Windows only).
 
-
-
-%%% Local Variables: 
-%%% mode: latex
-%%% TeX-master: "referenc"
-%%% End: 

docs/latex/wx/mouseevt.tex

@@ -188,7 +188,9 @@ See also \helpref{wxMouseEvent::Leaving}{wxmouseeventleaving}.
 
 \constfunc{wxPoint}{GetPosition}{\void}
 
-\constfunc{void}{GetPosition}{\param{long *}{x}, \param{long *}{y}}
+\constfunc{void}{GetPosition}{\param{wxCoord*}{ x}, \param{wxCoord*}{ y}}
+
+\constfunc{void}{GetPosition}{\param{long*}{ x}, \param{long*}{ y}}
 
 Sets *x and *y to the position at which the event occurred.
 

docs/latex/wx/mutex.tex

@@ -67,7 +67,7 @@ None.
 
 \wxheading{See also}
 
-\helpref{wxThread}{wxthread}, \helpref{wxCondition}{wxcondition},
+\helpref{wxThread}{wxthread}, \helpref{wxCondition}{wxcondition}, 
 \helpref{wxMutexLocker}{wxmutexlocker}, \helpref{wxCriticalSection}{wxcriticalsection}
 
 \latexignore{\rtfignore{\wxheading{Members}}}

docs/latex/wx/nbsizer.tex

@@ -9,7 +9,7 @@ sizer.
 
 In order to query the size of notebook page, this page needs to have its
 own sizer, otherwise the wxNotebookSizer will ignore it. Notebook pages
-get there sizer by assiging one to them using \helpref{wxWindow::SetSizer}{wxwindowsetsizer}
+get there sizer by assiging one to them using \helpref{wxWindow::SetSizer}{wxwindowsetsizer} 
 and setting the auto-layout option to TRUE using 
 \helpref{wxWindow::SetAutolayout}{wxwindowsetautoLayout}. Here is one
 example showing how to add a notebook page that the notebook sizer is

docs/latex/wx/outptstr.tex

@@ -13,6 +13,8 @@ wxOutputStream is an abstract base class which may not be used directly.
 
 <wx/stream.h>
 
+\latexignore{\rtfignore{\wxheading{Members}}}
+
 % -----------
 % ctor & dtor
 % -----------
@@ -69,47 +71,3 @@ Reads data from the specified input stream and stores them
 in the current stream. The data is read until an error is raised
 by one of the two streams.
 
-% -----------------------------------------------------------------------------
-% wxCountingOutputStream
-% -----------------------------------------------------------------------------
-\section{\class{wxCountingOutputStream}}\label{wxcountingoutputstream}
-
-wxCountingOutputStream is specialized output stream which does not write any data anyway,
-instead it counts how many bytes would get written if this were a normal stream. This
-can sometimes be useful or required if some data gets serialized to a stream or compressed
-by using stream compression and thus the final size of the stream cannot be known other
-than pretending to write the stream. One case where the resulting size would have to be
-known is if the data has to be written to a piece of memory and the memory has to be
-allocated before writing to it (which is probably always the case when writing to a 
-memory stream).
-
-\wxheading{Derived from}
-
-\helpref{wxOutputStream}{wxoutputstream}
-\helpref{wxStreamBase}{wxstreambase}
-
-\wxheading{Include files}
-
-<wx/stream.h>
-
-% -----------
-% ctor & dtor
-% -----------
-\membersection{wxCountingOutputStream::wxCountingOutputStream}
-
-\func{}{wxCountingOutputStream}{\void}
-
-Creates a wxCountingOutputStream object.
-
-\membersection{wxCountingOutputStream::\destruct{wxCountingOutputStream}}
-
-\func{}{\destruct{wxCountingOutputStream}}{\void}
-
-Destructor.
-
-\membersection{wxCountingOutputStream::GetSize}
-
-\constfunc{size\_t}{GetSize}{\void}
-
-Returns the current size of the stream.
-

docs/latex/wx/plotcurve.tex

@@ -79,7 +79,7 @@ return 0.5 or maybe 1.0 for nicer aesthetics.
 \func{void}{SetOffsetY}{\param{int }{offsetY}}
 
 When displaying several curves in one window, it is often useful to assign
-different offsets to the curves. You should call \helpref{wxPlotWindow::Move}{wxplotwindowmove}
+different offsets to the curves. You should call \helpref{wxPlotWindow::Move}{wxplotwindowmove} 
 to set this value after you have added the curve to the window.
 
 \membersection{wxPlotCurve::SetStartY}\label{wxplotcurvesetstarty}

docs/latex/wx/plotwindow.tex

@@ -14,7 +14,7 @@ of the curves, enlarging them or scrolling from one position to another. Note
 that this window is not useful for real-time measuring or for displaying charts
 with error bars etc.
 
-A single curve in the plot window is represented by the \helpref{wxPlotCurve}{wxplotcurve}
+A single curve in the plot window is represented by the \helpref{wxPlotCurve}{wxplotcurve} 
 class.
 
 The wxPlotWindow interacts with program using events, for example when clicking

docs/latex/wx/print.tex

@@ -16,12 +16,12 @@ between the print dialogs and the application.
 
 \wxheading{See also}
 
-\helpref{wxPrintDialog}{wxprintdialog},
+\helpref{wxPrintDialog}{wxprintdialog}, 
-\helpref{wxPageSetupDialog}{wxpagesetupdialog},
+\helpref{wxPageSetupDialog}{wxpagesetupdialog}, 
-\helpref{wxPrintDialogData}{wxprintdialogdata},
+\helpref{wxPrintDialogData}{wxprintdialogdata}, 
-\helpref{wxPageSetupDialogData}{wxpagesetupdialogdata},
+\helpref{wxPageSetupDialogData}{wxpagesetupdialogdata}, 
-\helpref{wxPrintDialog Overview}{wxprintdialogoverview},
+\helpref{wxPrintDialog Overview}{wxprintdialogoverview}, 
-\helpref{wxPrinterDC}{wxprinterdc},
+\helpref{wxPrinterDC}{wxprinterdc}, 
 \helpref{wxPostScriptDC}{wxpostscriptdc}
 
 \wxheading{Remarks}
@@ -850,8 +850,6 @@ context to draw on.
 
 \section{\class{wxPrintPreview}}\label{wxprintpreview}
 
-\overview{Printing framework overview}{printingoverview}
-
 Objects of this class manage the print preview process. The object is passed
 a wxPrintout object, and the wxPrintPreview object itself is passed to
 a wxPreviewFrame object. Previewing is started by initializing and showing

docs/latex/wx/progdlg.tex

@@ -45,20 +45,20 @@ bitmask constants defined in wx/defs.h:
 
 \twocolwidtha{7cm}
 \begin{twocollist}\itemsep=0pt
-\twocolitem{wxPD\_APP\_MODAL}{Make the progress dialog modal. If this flag is
+\twocolitem{{\bf wxPD\_APP\_MODAL}}{Make the progress dialog modal. If this flag is
 not given, it is only "locally" modal - that is the input to the parent
 window is disabled, but not to the other ones.}
-\twocolitem{wxPD\_AUTO\_HIDE}{By default, the progress dialog will disappear
+\twocolitem{{\bf wxPD\_AUTO\_HIDE}}{By default, the progress dialog will disappear
 from screen as soon as the maximum value of the progress meter has been
 reached. This flag prevents it from doing it - instead the dialog will wait
 until the user closes it.}
-\twocolitem{wxPD\_CAN\_ABORT}{This flag tells the dialog that it should have a
+\twocolitem{{\bf wxPD\_CAN\_ABORT}}{This flag tells the dialog that it should have a
 "Cancel" button which the user may press. If this happens, the next call to 
  \helpref{Update()}{wxprogressdialogupdate} will return FALSE.}
-\twocolitem{wxPD\_ELAPSED\_TIME}{This flag tells the dialog that it should show elapsed time (since creating the dialog).}
+\twocolitem{{\bf wxPD\_ELAPSED\_TIME}}{This flag tells the dialog that it should show elapsed time (since creating the dialog).}
-\twocolitem{wxPD\_ESTIMATED\_TIME}{This flag tells the dialog that it should show estimated time.}
+\twocolitem{{\bf wxPD\_ESTIMATED\_TIME}}{This flag tells the dialog that it should show estimated time.}
-\twocolitem{wxPD\_REMAINING\_TIME}{This flag tells the dialog that it should show remaining time.}
+\twocolitem{{\bf wxPD\_REMAINING\_TIME}}{This flag tells the dialog that it should show remaining time.}
-\twocolitem{wxGA\_SMOOTH}{This flag tells the dialog that it should use
+\twocolitem{{\bf wxPD\_SMOOTH}}{This flag tells the dialog that it should use
 smooth gauge (has effect only under 32bit Windows).}
 \end{twocollist}%
 }

docs/latex/wx/propbfva.tex

@@ -1,8 +1,13 @@
 \section{\class{wxBoolFormValidator}}\label{wxboolformvalidator}
 
-\overview{Validator classes}{proplistvalidatorclasses}
+This class validates a boolean value for a \helpref{form view}{wxpropertyformview}.
+The associated control must be a wxCheckBox.
 
-This class validates a boolean value for a form view. The associated panel item must be a wxCheckBox.
+\wxheading{See also}
+
+\helpref{Property validator classes}{proplistvalidatorclasses}
+
+\latexignore{\rtfignore{\wxheading{Members}}}
 
 \membersection{wxBoolFormValidator::wxBoolFormValidator}
 

docs/latex/wx/propblva.tex

@@ -1,8 +1,12 @@
 \section{\class{wxBoolListValidator}}\label{wxboollistvalidator}
 
-\overview{Validator classes}{proplistvalidatorclasses}
+This class validates a boolean value for a \helpref{property list view}{wxpropertylistview}.
 
-This class validates a boolean value for a list view.
+\wxheading{See also}
+
+\helpref{Validator classes}{proplistvalidatorclasses}
+
+\latexignore{\rtfignore{\wxheading{Members}}}
 
 \membersection{wxBoolListValidator::wxBoolListValidator}
 

docs/latex/wx/property.tex

@@ -18,6 +18,7 @@ An alternative method is to use the {\it role} parameter to specify what kind
 of validator would be appropriate; for example, specifying ``filename" for the role
 would allow the property view to find an appropriate validator at edit time.
 
+\latexignore{\rtfignore{\wxheading{Members}}}
 
 \membersection{wxProperty::wxProperty}
 

docs/latex/wx/propflva.tex

@@ -1,10 +1,14 @@
 \section{\class{wxFilenameListValidator}}\label{wxfilenamelistvalidator}
 
-\overview{Validator classes}{proplistvalidatorclasses}
+This class validates a filename for a \helpref{property list view}{wxpropertylistview}, allowing the user to edit it textually and also popping up
-
-This class validates a filename for a list view, allowing the user to edit it textually and also popping up
 a file selector in ``detailed editing" mode.
 
+\wxheading{See also}
+
+\helpref{Validator classes}{proplistvalidatorclasses}
+
+\latexignore{\rtfignore{\wxheading{Members}}}
+
 \membersection{wxFilenameListValidator::wxFilenameListValidator}
 
 \func{void}{wxFilenameListValidator}{\param{wxString }{message = ``Select a file"}, \param{wxString }{wildcard = ``*.*"},

docs/latex/wx/propford.tex

@@ -5,10 +5,12 @@ be used for viewing a form property sheet. Pass a property form view object, and
 will pass OnClose and OnDefaultAction listbox messages to the view class for
 processing.
 
+\latexignore{\rtfignore{\wxheading{Members}}}
+
 \membersection{wxPropertyFormDialog::wxPropertyFormDialog}
 
 \func{void}{wxPropertyFormDialog}{\param{wxPropertyFormView *}{view}, \param{wxWindow *}{parent}, \param{char *}{title},
- \param{Bool}{ modal=FALSE}, \param{int}{ x=-1}, \param{int}{ y=-1}, \param{int}{ width=-1}, \param{int}{height=-1},
+ \param{bool}{ modal=FALSE}, \param{int}{ x=-1}, \param{int}{ y=-1}, \param{int}{ width=-1}, \param{int}{height=-1},
  \param{long}{ style=wxDEFAULT\_DIALOG\_STYLE}, \param{char *}{name=``dialogBox"}}
 
 Constructor.
@@ -19,4 +21,3 @@ Constructor.
 
 Destructor.
 
-

docs/latex/wx/propforf.tex

@@ -7,6 +7,8 @@ will pass OnClose messages to the view class for processing.
 Call Initialize to create the panel and associate the view; override OnCreatePanel
 if you wish to use a panel class other than the default wxPropertyFormPanel.
 
+\latexignore{\rtfignore{\wxheading{Members}}}
+
 \membersection{wxPropertyFormFrame::wxPropertyFormFrame}
 
 \func{void}{wxPropertyFormFrame}{\param{wxPropertyFormView *}{view}, \param{wxFrame *}{parent}, \param{char *}{title},
@@ -29,7 +31,7 @@ Returns the panel associated with the frame.
 
 \membersection{wxPropertyFormFrame::Initialize}
 
-\func{Bool}{Initialize}{\void}
+\func{bool}{Initialize}{\void}
 
 Must be called to create the panel and associate the view with the panel and frame.
 
@@ -39,4 +41,3 @@ Must be called to create the panel and associate the view with the panel and fra
 
 Creates a panel. Override this to create a panel type other than wxPropertyFormPanel.
 
-

docs/latex/wx/propforp.tex

@@ -5,6 +5,8 @@ be used for viewing a property form. Pass a property form view object, and the p
 will pass OnDefaultAction listbox messages to the view class for
 processing.
 
+\latexignore{\rtfignore{\wxheading{Members}}}
+
 \membersection{wxPropertyFormPanel::wxPropertyFormPanel}
 
 \func{void}{wxPropertyFormPanel}{\param{wxPropertyFormView *}{view}, \param{wxWindow *}{parent},
@@ -19,5 +21,3 @@ Constructor.
 
 Destructor.
 
-
-

docs/latex/wx/propforv.tex

@@ -1,10 +1,14 @@
 \section{\class{wxPropertyFormValidator}}\label{wxpropertyformvalidator}
 
-\overview{wxPropertyFormValidator overview}{wxpropertyformvalidatoroverview}
-
 The {\bf wxPropertyFormValidator} class defines a base class for form validators. By overriding virtual functions,
 the programmer can create custom behaviour for kinds of property.
 
+\wxheading{See also}
+
+\helpref{wxPropertyFormValidator overview}{wxpropertyformvalidatoroverview}
+
+\latexignore{\rtfignore{\wxheading{Members}}}
+
 \membersection{wxPropertyFormValidator::wxPropertyFormValidator}
 
 \func{void}{wxPropertyFormValidator}{\param{long}{ flags = 0}}
@@ -19,7 +23,7 @@ Destructor.
 
 \membersection{wxPropertyFormValidator::OnCommand}
 
-\func{Bool}{OnCommand}{\param{wxProperty *}{property}, \param{wxPropertyFormView *}{view},
+\func{bool}{OnCommand}{\param{wxProperty *}{property}, \param{wxPropertyFormView *}{view},
  \param{wxWindow *}{parentWindow}, \param{wxCommandEvent\& }{event}}
 
 Called when the control corresponding to the property receives a command (if not intercepted
@@ -27,7 +31,7 @@ by a callback associated with the actual control).
 
 \membersection{wxPropertyFormValidator::OnCheckValue}
 
-\func{Bool}{OnCheckValue}{\param{wxProperty *}{property}, \param{wxPropertyFormView *}{view},
+\func{bool}{OnCheckValue}{\param{wxProperty *}{property}, \param{wxPropertyFormView *}{view},
  \param{wxWindow *}{parentWindow}}
  
 Called when the view checks the property value. The value checked by this validator should be taken from the
@@ -35,23 +39,22 @@ panel item corresponding to the property.
 
 \membersection{wxPropertyFormValidator::OnDisplayValue}
 
-\func{Bool}{OnDisplayValue}{\param{wxProperty *}{property}, \param{wxPropertyFormView *}{view},
+\func{bool}{OnDisplayValue}{\param{wxProperty *}{property}, \param{wxPropertyFormView *}{view},
  \param{wxWindow *}{parentWindow}}
 
 Should display the property value in the appropriate control.
  
 \membersection{wxPropertyFormValidator::OnDoubleClick}
 
-\func{Bool}{OnDoubleClick}{\param{wxProperty *}{property}, \param{wxPropertyFormView *}{view},
+\func{bool}{OnDoubleClick}{\param{wxProperty *}{property}, \param{wxPropertyFormView *}{view},
  \param{wxWindow *}{parentWindow}}
 
 Called when the control corresponding to the property is double clicked (listboxes only).
 
 \membersection{wxPropertyFormValidator::OnRetrieveValue}
 
-\func{Bool}{OnRetrieveValue}{\param{wxProperty *}{property}, \param{wxPropertyFormView *}{view},
+\func{bool}{OnRetrieveValue}{\param{wxProperty *}{property}, \param{wxPropertyFormView *}{view},
  \param{wxWindow *}{parentWindow}}
 
 Should do the transfer from the property editing area to the property itself.
 
-

docs/latex/wx/propfovi.tex

@@ -1,10 +1,14 @@
 \section{\class{wxPropertyFormView}}\label{wxpropertyformview}
 
-\overview{wxPropertyFormView overview}{wxpropertyformviewoverview}
-
 The {\bf wxPropertyFormView} class shows a wxPropertySheet as a view onto a panel or dialog
 box which has already been created.
 
+\wxheading{See also}
+
+\helpref{wxPropertyFormView overview}{wxpropertyformviewoverview}
+
+\latexignore{\rtfignore{\wxheading{Members}}}
+
 \membersection{wxPropertyFormView::wxPropertyFormView}
 
 \func{void}{wxPropertyFormView}{\param{long}{ flags = 0}}
@@ -28,7 +32,7 @@ association manually.
 
 \membersection{wxPropertyFormView::Check}\label{wxpropertyformviewcheck}
 
-\func{Bool}{Check}{\void}
+\func{bool}{Check}{\void}
 
 Checks all properties by calling the appropriate validators; returns FALSE if a validation failed.
 
@@ -88,14 +92,13 @@ Sets the managed window (a frame or dialog) associated with the view.
 
 \membersection{wxPropertyFormView::TransferToDialog}\label{wxpropertyformviewtransfertodialog}
 
-\func{Bool}{TransferToDialog}{\void}
+\func{bool}{TransferToDialog}{\void}
 
 Transfers property values to the controls in the dialog.
 
 \membersection{wxPropertyFormView::TransferToPropertySheet}\label{wxpropertyformviewtransfertopropertysheet}
 
-\func{Bool}{TransferToPropertySheet}{\void}
+\func{bool}{TransferToPropertySheet}{\void}
 
 Transfers property values from the controls in the dialog to the property sheet.
 
-

docs/latex/wx/propifva.tex

@@ -1,10 +1,14 @@
 \section{\class{wxIntegerFormValidator}}\label{wxintegerformvalidator}
 
-\overview{Validator classes}{proplistvalidatorclasses}
+This class validates a range of integer values for a form view. The associated control must be a wxTextCtrl
-
-This class validates a range of integer values for a form view. The associated panel item must be a wxText
 or wxSlider.
 
+\wxheading{See also}
+
+\helpref{Validator classes}{proplistvalidatorclasses}
+
+\latexignore{\rtfignore{\wxheading{Members}}}
+
 \membersection{wxIntegerFormValidator::wxIntegerFormValidator}
 
 \func{void}{wxIntegerFormValidator}{\param{long }{min=0}, \param{long }{max=0},
@@ -12,4 +16,3 @@ or wxSlider.
 
 Constructor. Assigning zero to minimum and maximum values indicates that there is no range to check.
 
-

docs/latex/wx/propilva.tex

@@ -1,8 +1,12 @@
 \section{\class{wxIntegerListValidator}}\label{wxintegerlistvalidator}
 
+This class validates a range of integer values for a list view.
+
+\wxheading{See also}
+
 \overview{Validator classes}{proplistvalidatorclasses}
 
-This class validates a range of integer values for a list view.
+\latexignore{\rtfignore{\wxheading{Members}}}
 
 \membersection{wxIntegerListValidator::wxIntegerListValidator}
 

docs/latex/wx/proplisd.tex

@@ -5,10 +5,12 @@ be used for viewing a property list. Pass a property list view object, and the d
 will pass OnClose and OnDefaultAction listbox messages to the view class for
 processing.
 
+\latexignore{\rtfignore{\wxheading{Members}}}
+
 \membersection{wxPropertyListDialog::wxPropertyListDialog}
 
 \func{void}{wxPropertyListDialog}{\param{wxPropertyListView *}{view}, \param{wxWindow *}{parent}, \param{char *}{title},
- \param{Bool}{ modal=FALSE}, \param{int}{ x=-1}, \param{int}{ y=-1}, \param{int}{ width=-1}, \param{int}{height=-1},
+ \param{bool}{ modal=FALSE}, \param{int}{ x=-1}, \param{int}{ y=-1}, \param{int}{ width=-1}, \param{int}{height=-1},
  \param{long}{ style=wxDEFAULT\_DIALOG\_STYLE}, \param{char *}{name=``dialogBox"}}
 
 Constructor.
@@ -19,4 +21,3 @@ Constructor.
 
 Destructor.
 
-

docs/latex/wx/proplisf.tex

@@ -7,6 +7,8 @@ will pass OnClose messages to the view class for processing.
 Call Initialize to create the panel and associate the view; override OnCreatePanel
 if you wish to use a panel class other than the default wxPropertyListPanel.
 
+\latexignore{\rtfignore{\wxheading{Members}}}
+
 \membersection{wxPropertyListFrame::wxPropertyListFrame}
 
 \func{void}{wxPropertyListFrame}{\param{wxPropertyListView *}{view}, \param{wxFrame *}{parent}, \param{char *}{title},
@@ -29,7 +31,7 @@ Returns the panel associated with the frame.
 
 \membersection{wxPropertyListFrame::Initialize}
 
-\func{Bool}{Initialize}{\void}
+\func{bool}{Initialize}{\void}
 
 Must be called to create the panel and associate the view with the panel and frame.
 
@@ -39,4 +41,3 @@ Must be called to create the panel and associate the view with the panel and fra
 
 Creates a panel. Override this to create a panel type other than wxPropertyListPanel.
 
-

docs/latex/wx/proplisp.tex

@@ -5,6 +5,8 @@ be used for viewing a property list. Pass a property list view object, and the p
 will pass OnDefaultAction listbox messages to the view class for
 processing.
 
+\latexignore{\rtfignore{\wxheading{Members}}}
+
 \membersection{wxPropertyListPanel::wxPropertyListPanel}
 
 \func{void}{wxPropertyListPanel}{\param{wxPropertyListView *}{view}, \param{wxWindow *}{parent},
@@ -19,6 +21,3 @@ Constructor.
 
 Destructor.
 
-
-
-

docs/latex/wx/proplist.tex

@@ -99,14 +99,6 @@ The property class library comprises the following files:
 \item propform.h: wxPropertyListView and associated classes
 \end{itemize}
 
-
-
-
-
-
-
-
-
 \section{Topic overviews}\label{proplistoverviews}
 
 This chapter contains a selection of topic overviews.
@@ -483,8 +475,6 @@ as described elsewhere, and the user edits away. When the user has finished edit
 wxButtonWithProperties::SetProperty to transfer the wxProperty value back into the button
 by way of an appropriate call, wxWindow::SetSize in the case of width and height properties.
 
-
-
 \section{Classes by category}\label{proplistclassesbycat}
 
 A classification of property sheet classes by category.
@@ -497,7 +487,6 @@ A classification of property sheet classes by category.
 \item \helpref{wxPropertySheet}{wxpropertysheet}
 \end{itemize}
 
-
 \subsection{Validator classes}\label{proplistvalidatorclasses}
 
 Validators check that the values the user has entered for a property are

docs/latex/wx/propliva.tex

@@ -1,10 +1,14 @@
 \section{\class{wxPropertyListValidator}}\label{wxpropertylistvalidator}
 
-\overview{wxPropertyListValidator overview}{wxpropertylistvalidatoroverview}
-
 The {\bf wxPropertyListValidator} abstract class is the base class for
 deriving validators for property lists.
 
+\wxheading{See also}
+
+\helpref{wxPropertyListValidator overview}{wxpropertylistvalidatoroverview}
+
+\latexignore{\rtfignore{\wxheading{Members}}}
+
 \membersection{wxPropertyListValidator::wxPropertyListValidator}
 
 \func{void}{wxPropertyListValidator}{\param{long}{ flags = wxPROP\_ALLOW\_TEXT\_EDITING}}
@@ -19,7 +23,7 @@ Destructor.
 
 \membersection{wxPropertyListValidator::OnCheckValue}
 
-\func{Bool}{OnCheckValue}{\param{wxProperty *}{property}, \param{wxPropertyListView *}{view},
+\func{bool}{OnCheckValue}{\param{wxProperty *}{property}, \param{wxPropertyListView *}{view},
  \param{wxWindow *}{parentWindow}}
  
 Called when the Tick (Confirm) button is pressed or focus is list. Return FALSE if the value
@@ -27,21 +31,21 @@ was invalid, which is a signal restores the old value. Return TRUE if the value
 
 \membersection{wxPropertyListValidator::OnClearControls}
 
-\func{Bool}{OnClearControls}{\param{wxProperty *}{property}, \param{wxPropertyListView *}{view},
+\func{bool}{OnClearControls}{\param{wxProperty *}{property}, \param{wxPropertyListView *}{view},
  \param{wxWindow *}{parentWindow}}
  
 Allows the clearing (enabling, disabling) of property list controls, when the focus leaves the current property.
 
 \membersection{wxPropertyListValidator::OnClearDetailControls}
 
-\func{Bool}{OnClearDetailControls}{\param{wxProperty *}{property}, \param{wxPropertyListView *}{view},
+\func{bool}{OnClearDetailControls}{\param{wxProperty *}{property}, \param{wxPropertyListView *}{view},
  \param{wxWindow *}{parentWindow}}
  
 Called when the focus is lost, if the validator is in detailed editing mode.
 
 \membersection{wxPropertyListValidator::OnDisplayValue}
 
-\func{Bool}{OnDisplayValue}{\param{wxProperty *}{property}, \param{wxPropertyListView *}{view},
+\func{bool}{OnDisplayValue}{\param{wxProperty *}{property}, \param{wxPropertyListView *}{view},
  \param{wxWindow *}{parentWindow}}
 
 Should display the value in the appropriate controls. The default implementation gets the
@@ -49,7 +53,7 @@ textual value from the property and inserts it into the text edit control.
  
 \membersection{wxPropertyListValidator::OnDoubleClick}
 
-\func{Bool}{OnDoubleClick}{\param{wxProperty *}{property}, \param{wxPropertyListView *}{view},
+\func{bool}{OnDoubleClick}{\param{wxProperty *}{property}, \param{wxPropertyListView *}{view},
  \param{wxWindow *}{parentWindow}}
 
 Called when the property is double clicked. Extra functionality can be provided,
@@ -57,7 +61,7 @@ such as cycling through possible values.
 
 \membersection{wxPropertyListValidator::OnEdit}
 
-\func{Bool}{OnEdit}{\param{wxProperty *}{property}, \param{wxPropertyListView *}{view},
+\func{bool}{OnEdit}{\param{wxProperty *}{property}, \param{wxPropertyListView *}{view},
  \param{wxWindow *}{parentWindow}}
  
 Called when the Edit (detailed editing) button is pressed. The default implementation
@@ -66,7 +70,7 @@ this function to show the file selector.
 
 \membersection{wxPropertyListValidator::OnPrepareControls}
 
-\func{Bool}{OnPrepareControls}{\param{wxProperty *}{property}, \param{wxPropertyListView *}{view},
+\func{bool}{OnPrepareControls}{\param{wxProperty *}{property}, \param{wxPropertyListView *}{view},
  \param{wxWindow *}{parentWindow}}
 
 Called to allow the validator to setup the display, such enabling or disabling buttons, and
@@ -75,14 +79,14 @@ value options).
 
 \membersection{wxPropertyListValidator::OnPrepareDetailControls}
 
-\func{Bool}{OnPrepareDetailControls}{\param{wxProperty *}{property}, \param{wxPropertyListView *}{view},
+\func{bool}{OnPrepareDetailControls}{\param{wxProperty *}{property}, \param{wxPropertyListView *}{view},
  \param{wxWindow *}{parentWindow}}
  
 Called when the property is edited `in detail', i.e. when the Edit button is pressed.
 
 \membersection{wxPropertyListValidator::OnRetrieveValue}
 
-\func{Bool}{OnRetrieveValue}{\param{wxProperty *}{property}, \param{wxPropertyListView *}{view},
+\func{bool}{OnRetrieveValue}{\param{wxProperty *}{property}, \param{wxPropertyListView *}{view},
  \param{wxWindow *}{parentWindow}}
 
 Called when Tick (Confirm) is pressed or focus is lost or view wants to update
@@ -90,7 +94,7 @@ the property list. Should do the transfer from the property editing area to the
 
 \membersection{wxPropertyListValidator::OnSelect}
 
-\func{Bool}{OnSelect}{\param{Bool}{ select}, \param{wxProperty *}{property}, \param{wxPropertyListView *}{view},
+\func{bool}{OnSelect}{\param{bool}{ select}, \param{wxProperty *}{property}, \param{wxPropertyListView *}{view},
  \param{wxWindow *}{parentWindow}}
 
 Called when the property is selected or deselected: typically displays the value
@@ -98,11 +102,9 @@ in the edit control (having chosen a suitable control to display: (non)editable
 
 \membersection{wxPropertyListValidator::OnValueListSelect}
 
-\func{Bool}{OnValueListSelect}{\param{wxProperty *}{property}, \param{wxPropertyListView *}{view},
+\func{bool}{OnValueListSelect}{\param{wxProperty *}{property}, \param{wxPropertyListView *}{view},
  \param{wxWindow *}{parentWindow}}
 
 Called when the value listbox is selected. The default behaviour is to copy
 string to text control, and retrieve the value into the property.
 
-
-

docs/latex/wx/proplosv.tex

@@ -1,7 +1,5 @@
 \section{\class{wxListOfStringsListValidator}}\label{wxlistofstringslistvalidator}
 
-\overview{Validator classes}{proplistvalidatorclasses}
-
 This class validates a list of strings for a list view. When editing the property,
 a dialog box is presented for adding, deleting or editing entries in the list.
 At present no constraints may be supplied.
@@ -19,6 +17,12 @@ For example:
   sheet->AddProperty(new wxProperty("fred", strings, "stringlist"));
 \end{verbatim}
 
+\wxheading{See also}
+
+\helpref{Validator classes}{proplistvalidatorclasses}
+
+\latexignore{\rtfignore{\wxheading{Members}}}
+
 \membersection{wxListOfStringsListValidator::wxListofStringsListValidator}
 
 \func{void}{wxListOfStringsListValidator}{\param{long}{ flags=0}}

docs/latex/wx/proplstv.tex

@@ -1,9 +1,13 @@
 \section{\class{wxPropertyListView}}\label{wxpropertylistview}
 
-\overview{wxPropertyListView overview}{wxpropertylistviewoverview}
-
 The {\bf wxPropertyListView} class shows a wxPropertySheet as a Visual Basic-style property list.
 
+\wxheading{See also}
+
+\helpref{wxPropertyListView overview}{wxpropertylistviewoverview}
+
+\latexignore{\rtfignore{\wxheading{Members}}}
+
 \membersection{wxPropertyListView::wxPropertyListView}
 
 \func{void}{wxPropertyListView}{\param{long}{ flags = wxPROP\_BUTTON\_DEFAULT}}
@@ -36,14 +40,14 @@ Associates the window on which the controls will be displayed, with the view (se
 
 \membersection{wxPropertyListView::BeginShowingProperty}\label{wxpropertylistviewbeginshowingproperty}
 
-\func{Bool}{BeginShowingProperty}{\param{wxProperty *}{property}}
+\func{bool}{BeginShowingProperty}{\param{wxProperty *}{property}}
 
 Finds the appropriate validator and loads the property into the controls, by calling
 wxPropertyValidator::OnPrepareControls and then wxPropertyListView::DisplayProperty.
 
 \membersection{wxPropertyListView::DisplayProperty}\label{wxpropertylistviewdisplayproperty}
 
-\func{Bool}{DisplayProperty}{\param{wxProperty *}{property}}
+\func{bool}{DisplayProperty}{\param{wxProperty *}{property}}
 
 Calls wxPropertyValidator::OnDisplayValue for the current property's validator. This function
 gets called by wxPropertyListView::BeginShowingProperty, which is in turn called
@@ -51,7 +55,7 @@ from ShowProperty, called by OnPropertySelect, called by the listbox callback wh
 
 \membersection{wxPropertyListView::EndShowingProperty}\label{wxpropertylistviewendshowingproperty}
 
-\func{Bool}{EndShowingProperty}{\param{wxProperty *}{property}}
+\func{bool}{EndShowingProperty}{\param{wxProperty *}{property}}
 
 Finds the appropriate validator and unloads the property from the controls, by calling
 wxPropertyListView::RetrieveProperty, wxPropertyValidator::OnClearControls and (if we're in
@@ -95,14 +99,13 @@ Sets the managed window (a frame or dialog) associated with the view.
 
 \membersection{wxPropertyListView::UpdatePropertyDisplayInList}\label{wxpropertylistviewupdatepropdisplay}
 
-\func{Bool}{UpdatePropertyDisplayInList}{\param{wxProperty *}{property}}
+\func{bool}{UpdatePropertyDisplayInList}{\param{wxProperty *}{property}}
 
 Updates the display for the given changed property.
 
 \membersection{wxPropertyListView::UpdatePropertyList}\label{wxpropertylistviewupdateproplist}
 
-\func{Bool}{UpdatePropertyList}{\param{Bool }{clearEditArea = TRUE}}
+\func{bool}{UpdatePropertyList}{\param{bool }{clearEditArea = TRUE}}
 
 Updates the whole property list display.
 
-

docs/latex/wx/propregv.tex

@@ -4,6 +4,8 @@ The {\bf wxPropertyValidatorRegistry} class is used for storing validators,
 indexed by the `role name' of the property, by which groups of property
 can be identified for the purpose of validation and editing.
 
+\latexignore{\rtfignore{\wxheading{Members}}}
+
 \membersection{wxPropertyValidatorRegistry::wxPropertyValidatorRegistry}
 
 \func{void}{wxPropertyValidatorRegistry}{\void}

docs/latex/wx/proprfva.tex

@@ -1,9 +1,13 @@
 \section{\class{wxRealFormValidator}}\label{wxrealformvalidator}
 
-\overview{Validator classes}{proplistvalidatorclasses}
-
 This class validates a range of real values for form views. The associated panel item must be a wxText.
 
+\wxheading{See also}
+
+\helpref{Validator classes}{proplistvalidatorclasses}
+
+\latexignore{\rtfignore{\wxheading{Members}}}
+
 \membersection{wxRealFormValidator::wxRealFormValidator}
 
 \func{void}{wxRealFormValidator}{\param{float }{min=0.0}, \param{float }{max=0.0},
@@ -11,4 +15,3 @@ This class validates a range of real values for form views. The associated panel
 
 Constructor. Assigning zero to minimum and maximum values indicates that there is no range to check.
 
-

docs/latex/wx/proprlva.tex

@@ -1,14 +1,19 @@
 \section{\class{wxRealListValidator}}\label{wxreallistvalidator}
 
-\overview{Validator classes}{proplistvalidatorclasses}
-
 This class validates a range of real values for property lists.
 
-\membersection{wxRealListValidator::wxreallistvalidator}
+\wxheading{See also}
+
+\helpref{Validator classes}{proplistvalidatorclasses}
+
+\helpref{wxPropertySheet overview}{wxpropertysheetoverview}
+
+\latexignore{\rtfignore{\wxheading{Members}}}
+
+\membersection{wxRealListValidator::wxRealListValidator}
 
 \func{void}{wxRealListValidator}{\param{float }{min=0.0}, \param{float }{max=0.0},
  \param{long}{ flags=wxPROP\_ALLOW\_TEXT\_EDITING}}
 
 Constructor. Assigning zero to minimum and maximum values indicates that there is no range to check.
 
-

docs/latex/wx/propsht.tex

@@ -1,10 +1,14 @@
 \section{\class{wxPropertySheet}}\label{wxpropertysheet}
 
-\overview{wxPropertySheet overview}{wxpropertysheetoverview}
-
 The {\bf wxPropertySheet} class is used for storing a number of
 wxProperty objects (essentially names and values).
 
+\wxheading{See also}
+
+\helpref{wxPropertySheet overview}{wxpropertysheetoverview}
+
+\latexignore{\rtfignore{\wxheading{Members}}}
+
 \membersection{wxPropertySheet::wxPropertySheet}
 
 \func{void}{wxPropertySheet}{\param{const wxString}{ name = ""}}
@@ -73,9 +77,7 @@ Sets property propname to value. Returns false if property is not a member of sh
 
 \membersection{wxPropertySheet::SetAllModified}
 
-\func{void}{SetAllModified}{\param{Bool}{ flag}}
+\func{void}{SetAllModified}{\param{bool}{ flag}}
 
 Sets the `modified' flag of each property value.
 
-
-

docs/latex/wx/propslv.tex

@@ -1,9 +1,13 @@
 \section{\class{wxStringListValidator}}\label{wxstringlistvalidator}
 
-\overview{Validator classes}{proplistvalidatorclasses}
-
 This class validates a string value, with an optional choice of possible values.
 
+\wxheading{See also}
+
+\helpref{Validator classes}{proplistvalidatorclasses}
+
+\latexignore{\rtfignore{\wxheading{Members}}}
+
 \membersection{wxStringListValidator::wxStringListValidator}
 
 \func{void}{wxStringListValidator}{\param{wxStringList *}{list=NULL}, \param{long}{ flags=0}}

docs/latex/wx/propstfv.tex

@@ -1,12 +1,16 @@
 \section{\class{wxStringFormValidator}}\label{wxstringformvalidator}
 
-\overview{Validator classes}{proplistvalidatorclasses}
-
 This class validates a string value for a form view, with an optional choice of possible values.
 The associated panel item must be a wxText, wxListBox or wxChoice. For wxListBox and wxChoice items,
 if the item is empty, the validator attempts to initialize the item from the strings in
 the validator. Note that this does not happen for XView wxChoice items since XView cannot reinitialize a wxChoice.
- 
+
+\wxheading{See also}
+
+\helpref{Validator classes}{proplistvalidatorclasses}
+
+\latexignore{\rtfignore{\wxheading{Members}}}
+
 \membersection{wxStringFormValidator::wxStringFormValidator}
 
 \func{void}{wxStringFormValidator}{\param{wxStringList *}{list=NULL}, \param{long}{ flags=0}}
@@ -14,4 +18,3 @@ the validator. Note that this does not happen for XView wxChoice items since XVi
 Constructor. Supply a list of strings to indicate a choice, or no strings to allow the
 user to freely edit the string. The string list will be deleted when the validator is deleted.
 
-

docs/latex/wx/propval.tex

@@ -18,6 +18,8 @@ A wxPropertyValue has one of the following types:
 \item wxPropertyValueStringPtr
 \end{itemize}
 
+\latexignore{\rtfignore{\wxheading{Members}}}
+
 \membersection{wxPropertyValue::wxPropertyValue}
 
 \func{void}{wxPropertyValue}{\void}
@@ -35,9 +37,9 @@ Construction from a string value.
 \func{void}{wxPropertyValue}{\param{long}{ val}}
 
 Construction from an integer value. You may need to cast to (long) to
-avoid confusion with other constructors (such as the Bool constructor).
+avoid confusion with other constructors (such as the bool constructor).
 
-\func{void}{wxPropertyValue}{\param{Bool}{ val}}
+\func{void}{wxPropertyValue}{\param{bool}{ val}}
 
 Construction from a boolean value.
 
@@ -71,7 +73,7 @@ Construction from a string pointer.
 
 Construction from an integer pointer.
 
-\func{void}{wxPropertyValue}{\param{Bool *}{val}}
+\func{void}{wxPropertyValue}{\param{bool *}{val}}
 
 Construction from an boolean pointer.
 
@@ -97,13 +99,13 @@ Appends a property value to the list.
 
 \membersection{wxPropertyValue::BoolValue}
 
-\func{Bool}{BoolValue}{\void}
+\func{bool}{BoolValue}{\void}
 
 Returns the boolean value.
 
 \membersection{wxPropertyValue::BoolValuePtr}
 
-\func{Bool *}{BoolValuePtr}{\void}
+\func{bool *}{BoolValuePtr}{\void}
 
 Returns the pointer to the boolean value.
 
@@ -133,7 +135,7 @@ Gets the last value in the list.
 
 \membersection{wxPropertyValue::GetModified}
 
-\func{Bool}{GetModified}{\void}
+\func{bool}{GetModified}{\void}
 
 Returns TRUE if the value was modified since being created
 (or since SetModified was called).
@@ -194,7 +196,7 @@ Returns the pointer to the floating point value.
 
 \membersection{wxPropertyValue::SetModified}
 
-\func{void}{SetModified}{\param{Bool}{ flag}}
+\func{void}{SetModified}{\param{bool}{ flag}}
 
 Sets the `modified' flag.
 
@@ -224,7 +226,7 @@ Returns the value type.
 
 \func{void}{operator $=$}{\param{const long }{val}}
 
-\func{void}{operator $=$}{\param{const Bool }{val}}
+\func{void}{operator $=$}{\param{const bool }{val}}
 
 \func{void}{operator $=$}{\param{const float }{val}}
 
@@ -232,11 +234,9 @@ Returns the value type.
 
 \func{void}{operator $=$}{\param{const long *}{val}}
 
-\func{void}{operator $=$}{\param{const Bool *}{val}}
+\func{void}{operator $=$}{\param{const bool *}{val}}
 
 \func{void}{operator $=$}{\param{const float *}{val}}
 
 Assignment operators.
 
-
-

docs/latex/wx/propvald.tex

@@ -1,10 +1,14 @@
 \section{\class{wxPropertyValidator}}\label{wxpropertyvalidator}
 
-\overview{wxPropertyValidator overview}{wxpropertyvalidatoroverview}
-
 The {\bf wxPropertyValidator} abstract class is the base class for deriving
 validators for properties.
 
+\wxheading{See also}
+
+\helpref{wxPropertyValidator overview}{wxpropertyvalidatoroverview}
+
+\latexignore{\rtfignore{\wxheading{Members}}}
+
 \membersection{wxPropertyValidator::wxPropertyValidator}
 
 \func{void}{wxPropertyValidator}{\param{long}{ flags = 0}}
@@ -35,4 +39,3 @@ Gets the property for the validator.
 
 Sets the property for the validator.
 
-

docs/latex/wx/propview.tex

@@ -1,11 +1,15 @@
 \section{\class{wxPropertyView}}\label{wxpropertyview}
 
-\overview{wxPropertyView overview}{wxpropertyviewoverview}
-
 The {\bf wxPropertyView} abstract class is the base class for views
 of property sheets, acting as intermediaries between properties and
 actual windows.
 
+\wxheading{See also}
+
+\helpref{wxPropertyView overview}{wxpropertyviewoverview}
+
+\latexignore{\rtfignore{\wxheading{Members}}}
+
 \membersection{wxPropertyView::wxPropertyView}
 
 \func{void}{wxPropertyView}{\param{long}{ flags = wxPROP\_BUTTON\_DEFAULT}}
@@ -68,7 +72,7 @@ Virtual function that will be called when the Cancel button on the physical wind
 
 \membersection{wxPropertyView::OnClose}\label{wxpropertyviewonclose}
 
-\func{Bool}{OnClose}{\void}
+\func{bool}{OnClose}{\void}
 
 Virtual function that will be called when the physical window is closed. The default implementation returns FALSE.
 
@@ -88,7 +92,7 @@ to respond immediately to property value changes.
 
 \membersection{wxPropertyView::OnUpdateView}\label{wxpropertyviewonupdateview}
 
-\func{Bool}{OnUpdateView}{\void}
+\func{bool}{OnUpdateView}{\void}
 
 Called by the viewed object to update the view. The default implementation just returns
 FALSE.

docs/latex/wx/protocol.tex

@@ -16,7 +16,7 @@
 % Members
 % ----------------------------------------------------------------------------
 
-\latexignore{\rtfignore{\membersection{Members}}}
+\latexignore{\rtfignore{\wxheading{Members}}}
 
 \membersection{wxProtocol::Reconnect}\label{wxprotoreconnect}
 

docs/latex/wx/recrdset.tex

@@ -4,6 +4,9 @@ Each wxRecordSet represents an ODBC database query. You can make multiple querie
 at a time by using multiple wxRecordSets with a wxDatabase or you can make
 your queries in sequential order using the same wxRecordSet.
 
+Note: this class is considered obsolete, replaced by the Remstar wxDB/wxTable classes
+(documented separately in Word and PDF format, as odbc.doc and odbc.pdf).
+
 \wxheading{Derived from}
 
 \helpref{wxObject}{wxobject}

docs/latex/wx/screendc.tex

@@ -49,6 +49,13 @@ to implement this feature.
 You might use this pair of functions when implementing a drag feature, for example
 as in the \helpref{wxSplitterWindow}{wxsplitterwindow} implementation.
 
+\wxheading{Remarks}
+
+This function is probably obsolete since the X implementations
+allow drawing directly on the screen now. However, the fact that this
+function allows the screen to be refreshed afterwards, may be useful to
+some applications.
+
 \membersection{wxScreenDC::EndDrawingOnTop}\label{wxscreendcenddrawingontop}
 
 \func{bool}{EndDrawingOnTop}{\void}

docs/latex/wx/sizer.tex

@@ -1,7 +1,7 @@
 \section{\class{wxSizer}}\label{wxsizer}
 
 wxSizer is the abstract base class used for laying out subwindows in a window. You
-cannot use wxSizer directly; instead, you'll have to use \helpref{wxBoxSizer}{wxboxsizer},
+cannot use wxSizer directly; instead, you'll have to use \helpref{wxBoxSizer}{wxboxsizer}, 
 \helpref{wxStaticBoxSizer}{wxstaticboxsizer} or \helpref{wxNotebookSizer}{wxnotebooksizer}.
 
 The layout algorithm used by sizers in wxWindows is closely related to layout
@@ -133,7 +133,7 @@ Returns TRUE if the child item was found and removed, FALSE otherwise.
 \func{void}{SetDimension}{\param{int }{x}, \param{int }{y}, \param{int }{width}, \param{int }{height}}
 
 Call this to force the sizer to take the given dimension and thus force the items owned
-by the sizer to resize themselves according to the rules defined by the paramater in the
+by the sizer to resize themselves according to the rules defined by the paramater in the 
 \helpref{wxSizer::Add}{wxsizeradd} and \helpref{wxSizer::Prepend}{wxsizerprepend} methods.
 
 \membersection{wxSizer::GetSize}\label{wxsizergetsize}

docs/latex/wx/socket.tex

@@ -54,7 +54,7 @@ The {\bf wxSOCKET\_INPUT} event will be issued whenever there is data
 available for reading. This will be the case if the input queue was
 empty and new data arrives, or if the application has read some data
 yet there is still more data available. This means that the application
-does not need to read all available data in response to a
+does not need to read all available data in response to a 
 {\bf wxSOCKET\_INPUT} event, as more events will be produced as
 necessary.
 
@@ -64,9 +64,9 @@ with \helpref{Accept}{wxsocketserveraccept}. After that, new
 events will be generated only after an output operation fails
 with {\bf wxSOCKET\_WOULDBLOCK} and buffer space becomes available
 again. This means that the application should assume that it
-can write data to the socket until an {\bf wxSOCKET\_WOULDBLOCK}
+can write data to the socket until an {\bf wxSOCKET\_WOULDBLOCK} 
 error occurs; after this, whenever the socket becomes writable
-again the application will be notified with another
+again the application will be notified with another 
 {\bf wxSOCKET\_OUTPUT} event.
 
 The {\bf wxSOCKET\_CONNECTION} event is issued when a delayed connection
@@ -93,7 +93,7 @@ handler macro to direct events to member functions that take a
 
 \helpref{wxSocketEvent}{wxsocketevent}, 
 \helpref{wxSocketClient}{wxsocketclient}, 
-\helpref{wxSocketServer}{wxsocketserver},
+\helpref{wxSocketServer}{wxsocketserver}, 
 \helpref{Sockets sample}{samplesockets}
 
 % ---------------------------------------------------------------------------
@@ -189,8 +189,8 @@ releases of wxWindows.
 
 \func{}{wxSocketBase}{\void}
 
-Default constructor. Don't use it directly; instead, use
+Default constructor. Don't use it directly; instead, use 
-\helpref{wxSocketClient}{wxsocketclient} to construct a socket client, or
+\helpref{wxSocketClient}{wxsocketclient} to construct a socket client, or 
 \helpref{wxSocketServer}{wxsocketserver} to construct a socket server.
 
 \membersection{wxSocketBase::\destruct{wxSocketBase}}\label{wxsocketbasedestruct}
@@ -210,7 +210,7 @@ socket objects in the stack.
 
 You can setup a callback function to be called when an event occurs.
 The function will be called only for those events for which notification
-has been enabled with \helpref{Notify}{wxsocketbasenotify} and
+has been enabled with \helpref{Notify}{wxsocketbasenotify} and 
 \helpref{SetNotify}{wxsocketbasesetnotify}. The prototype of the
 callback must be as follows:
 
@@ -328,7 +328,7 @@ following calls: Discard, Peek, Read, ReadMsg, Unread, Write, WriteMsg.
 
 \constfunc{void *}{GetClientData}{\void}
 
-Returns a pointer of the client data for this socket, as set with
+Returns a pointer of the client data for this socket, as set with 
 \helpref{SetClientData}{wxsocketbasesetclientdata}
 
 %
@@ -385,11 +385,11 @@ some exception or abnormal problem. InterruptWait is automatically called
 when you \helpref{Close}{wxsocketbaseclose} a socket (and thus also upon
 socket destruction), so you don't need to use it in these cases.
 
-\helpref{wxSocketBase::Wait}{wxsocketbasewait},
+\helpref{wxSocketBase::Wait}{wxsocketbasewait}, 
-\helpref{wxSocketServer::WaitForAccept}{wxsocketserverwaitforaccept},
+\helpref{wxSocketServer::WaitForAccept}{wxsocketserverwaitforaccept}, 
-\helpref{wxSocketBase::WaitForLost}{wxsocketbasewaitforlost},
+\helpref{wxSocketBase::WaitForLost}{wxsocketbasewaitforlost}, 
-\helpref{wxSocketBase::WaitForRead}{wxsocketbasewaitforread},
+\helpref{wxSocketBase::WaitForRead}{wxsocketbasewaitforread}, 
-\helpref{wxSocketBase::WaitForWrite}{wxsocketbasewaitforwrite},
+\helpref{wxSocketBase::WaitForWrite}{wxsocketbasewaitforwrite}, 
 \helpref{wxSocketClient::WaitOnConnect}{wxsocketclientwaitonconnect}
 
 %
@@ -512,10 +512,10 @@ Calls to SaveState and RestoreState can be nested.
 
 This function saves the current state of the socket in a stack. Socket
 state includes flags, as set with \helpref{SetFlags}{wxsocketbasesetflags},
-event mask, as set with \helpref{SetNotify}{wxsocketbasesetnotify} and
+event mask, as set with \helpref{SetNotify}{wxsocketbasesetnotify} and 
-\helpref{Notify}{wxsocketbasenotify}, user data, as set with
+\helpref{Notify}{wxsocketbasenotify}, user data, as set with 
 \helpref{SetClientData}{wxsocketbasesetclientdata}, and asynchronous
-callback settings, as set with \helpref{Callback}{wxsocketbasecallback}
+callback settings, as set with \helpref{Callback}{wxsocketbasecallback} 
 and \helpref{CallbackData}{wxsocketbasecallbackdata}.
 
 Calls to SaveState and RestoreState can be nested.
@@ -533,7 +533,7 @@ Calls to SaveState and RestoreState can be nested.
 
 Sets user-supplied client data for this socket. All socket events will
 contain a pointer to this data, which can be retrieved with the
-\helpref{wxSocketEvent::GetClientData}{wxsocketeventgetclientdata}
+\helpref{wxSocketEvent::GetClientData}{wxsocketeventgetclientdata} 
 function.
 
 %
@@ -545,7 +545,7 @@ function.
 
 Sets an event handler to be called when a socket event occurs. The
 handler will be called for those events for which notification is
-enabled with \helpref{SetNotify}{wxsocketbasesetnotify} and
+enabled with \helpref{SetNotify}{wxsocketbasesetnotify} and 
 \helpref{Notify}{wxsocketbasenotify}.
 
 \wxheading{Parameters}
@@ -559,7 +559,7 @@ enabled with \helpref{SetNotify}{wxsocketbasesetnotify} and
 \helpref{wxSocketBase::SetNotify}{wxsocketbasesetnotify}, 
 \helpref{wxSocketBase::Notify}{wxsocketbasenotify}, 
 \helpref{wxSocketEvent}{wxsocketevent}, 
-\helpref{wxEvtHandler}{wxevthandler}, 
+\helpref{wxEvtHandler}{wxevthandler}
 
 %
 % SetFlags
@@ -663,7 +663,7 @@ For more information on socket events see \helpref{wxSocket events}{wxsocketbase
 \func{void}{SetTimeout}{\param{int }{seconds}}
 
 This function sets the default socket timeout in seconds. This timeout
-applies to all IO calls, and also to the \helpref{Wait}{wxsocketbasewait}
+applies to all IO calls, and also to the \helpref{Wait}{wxsocketbasewait} 
 family of functions if you don't specify a wait interval. Initially, the
 default is set to 10 minutes.
 
@@ -745,7 +745,7 @@ of flags being used. For a detailed explanation, see \helpref{wxSocketBase::SetF
 
 \func{wxSocketBase\&}{ReadMsg}{\param{void *}{ buffer}, \param{wxUint32}{ nbytes}}
 
-This function reads a buffer sent by \helpref{WriteMsg}{wxsocketbasewritemsg}
+This function reads a buffer sent by \helpref{WriteMsg}{wxsocketbasewritemsg} 
 on a socket. If the buffer passed to the function isn't big enough, the
 remaining bytes will be discarded. This function always waits for the
 buffer to be entirely filled, unless an error occurs.
@@ -843,11 +843,11 @@ FALSE if the timeout was reached.
 
 \wxheading{See also}
 
-\helpref{wxSocketBase::InterruptWait}{wxsocketbaseinterruptwait},
+\helpref{wxSocketBase::InterruptWait}{wxsocketbaseinterruptwait}, 
-\helpref{wxSocketServer::WaitForAccept}{wxsocketserverwaitforaccept},
+\helpref{wxSocketServer::WaitForAccept}{wxsocketserverwaitforaccept}, 
-\helpref{wxSocketBase::WaitForLost}{wxsocketbasewaitforlost},
+\helpref{wxSocketBase::WaitForLost}{wxsocketbasewaitforlost}, 
 \helpref{wxSocketBase::WaitForRead}{wxsocketbasewaitforread}, 
-\helpref{wxSocketBase::WaitForWrite}{wxsocketbasewaitforwrite},
+\helpref{wxSocketBase::WaitForWrite}{wxsocketbasewaitforwrite}, 
 \helpref{wxSocketClient::WaitOnConnect}{wxsocketclientwaitonconnect}
 
 %
@@ -904,7 +904,7 @@ Returns TRUE if the socket becomes readable, FALSE on timeout.
 
 \wxheading{See also}
 
-\helpref{wxSocketBase::InterruptWait}{wxsocketbaseinterruptwait},
+\helpref{wxSocketBase::InterruptWait}{wxsocketbaseinterruptwait}, 
 \helpref{wxSocketBase::Wait}{wxsocketbasewait}
 
 %
@@ -934,7 +934,7 @@ Returns TRUE if the socket becomes writable, FALSE on timeout.
 
 \wxheading{See also}
 
-\helpref{wxSocketBase::InterruptWait}{wxsocketbaseinterruptwait},
+\helpref{wxSocketBase::InterruptWait}{wxsocketbaseinterruptwait}, 
 \helpref{wxSocketBase::Wait}{wxsocketbasewait}
 
 %
@@ -980,8 +980,8 @@ of flags being used. For a detailed explanation, see \helpref{wxSocketBase::SetF
 \func{wxSocketBase\&}{WriteMsg}{\param{const void *}{ buffer}, \param{wxUint32}{ nbytes}}
 
 This function writes a buffer of {\it nbytes} bytes from the socket, but it
-writes a short header before so that \helpref{ReadMsg}{wxsocketbasereadmsg}
+writes a short header before so that \helpref{ReadMsg}{wxsocketbasereadmsg} 
-knows how much data should it actually read. So, a buffer sent with WriteMsg
+knows how much data should it actually read. So, a buffer sent with WriteMsg 
 {\bf must} be read with ReadMsg. This function always waits for the entire
 buffer to be sent, unless an error occurs.
 
@@ -1029,6 +1029,8 @@ For a detailed explanation, see \helpref{wxSocketBase::SetFlags}{wxsocketbaseset
 
 <wx/socket.h>
 
+\latexignore{\rtfignore{\wxheading{Members}}}
+
 % ---------------------------------------------------------------------------
 % Members
 % ---------------------------------------------------------------------------
@@ -1088,7 +1090,7 @@ and the connection failed.
 
 If {\it wait} was FALSE, and Connect returns FALSE, you should still
 be prepared to handle the completion of this connection request, either
-with \helpref{WaitOnConnect}{wxsocketclientwaitonconnect} or by watching
+with \helpref{WaitOnConnect}{wxsocketclientwaitonconnect} or by watching 
 {\bf wxSOCKET\_CONNECTION} and {\bf wxSOCKET\_LOST} events.
 
 \wxheading{See also}
@@ -1120,7 +1122,7 @@ as set with \helpref{SetTimeout}{wxsocketbasesettimeout}.}
 
 WaitOnConnect returns TRUE if the connection request completes. This
 does not necessarily mean that the connection was succesfully established;
-it might also happen that the connection was refused by the peer. Use
+it might also happen that the connection was refused by the peer. Use 
 \helpref{IsConnected}{wxsocketbaseisconnected} to distinguish between
 these two situations.
 
@@ -1144,8 +1146,8 @@ bool success = client->IsConnected();
 
 \wxheading{See also}
 
-\helpref{wxSocketClient::Connect}{wxsocketclientconnect},
+\helpref{wxSocketClient::Connect}{wxsocketclientconnect}, 
-\helpref{wxSocketBase::InterruptWait}{wxsocketbaseinterruptwait},
+\helpref{wxSocketBase::InterruptWait}{wxsocketbaseinterruptwait}, 
 \helpref{wxSocketBase::IsConnected}{wxsocketbaseisconnected}
 
 % ---------------------------------------------------------------------------
@@ -1233,7 +1235,7 @@ Returns the socket event type.
 \func{}{wxSocketServer}{\param{wxSockAddress\&}{ address}, \param{wxSocketFlags}{ flags = wxSOCKET_NONE}}
 
 Constructs a new server and tries to bind to the specified {\it address}.
-Before trying to accept new connections, test whether it succeeded with
+Before trying to accept new connections, test whether it succeeded with 
 \helpref{wxSocketBase::Ok}{wxsocketbaseok}.
 
 \wxheading{Parameters}
@@ -1258,7 +1260,7 @@ Destructor (it doesn't close the accepted connections).
 
 \func{wxSocketBase *}{Accept}{\param{bool}{ wait = TRUE}}
 
-Accepts an incoming connection request, and creates a new
+Accepts an incoming connection request, and creates a new 
 \helpref{wxSocketBase}{wxsocketbase} object which represents
 the server-side of the connection.
 
@@ -1269,7 +1271,7 @@ accepted, it will wait for the next incoming connection to arrive.
 If {\it wait} is FALSE, it will try to accept a pending connection
 if there is one, but it will always return immediately without blocking
 the GUI. If you want to use Accept in this way, you can either check for
-incoming connections with \helpref{WaitForAccept}{wxsocketserverwaitforaccept}
+incoming connections with \helpref{WaitForAccept}{wxsocketserverwaitforaccept} 
 or catch {\bf wxSOCKET\_CONNECTION} events, then call Accept once you know
 that there is an incoming connection waiting to be accepted.
 
@@ -1317,8 +1319,8 @@ connections.
 
 \func{bool}{WaitForAccept}{\param{long}{ seconds = -1}, \param{long}{ millisecond = 0}}
 
-This function waits for an incoming connection. Use it if you want to call
+This function waits for an incoming connection. Use it if you want to call 
-\helpref{Accept}{wxsocketserveraccept} or \helpref{AcceptWith}{wxsocketserveracceptwith}
+\helpref{Accept}{wxsocketserveraccept} or \helpref{AcceptWith}{wxsocketserveracceptwith} 
 with {\it wait} set to FALSE, to detect when an incoming connection is waiting
 to be accepted.
 

docs/latex/wx/statbmp.tex

@@ -92,5 +92,5 @@ Sets the bitmap label.
 
 \wxheading{See also}
 
-\docparam{wxStaticBitmap::GetBitmap}{wxstaticbitmapgetbitmap}
+\helpref{wxStaticBitmap::GetBitmap}{wxstaticbitmapgetbitmap}
 

docs/latex/wx/stream.tex

@@ -28,7 +28,6 @@ Constructor, creates a new stream buffer using {\it stream} as a parent stream
 and {\it mode} as the IO mode. {\it mode} can be: wxStreamBuffer::read,
 wxStreamBuffer::write, wxStreamBuffer::read\_write.
 
-
 One stream can have many stream buffers but only one is used internally to
 pass IO call (e.g. wxInputStream::Read() -> wxStreamBuffer::Read()), but you
 can call directly wxStreamBuffer::Read without any problems. Note that

docs/latex/wx/strmbase.tex

@@ -54,6 +54,7 @@ Returns TRUE if no error occured on the stream.
 \constfunc{wxStreamError}{LastError}{\void}
 
 This function returns the last error.
+
 \twocolwidtha{5cm}
 \begin{twocollist}\itemsep=0pt
 \twocolitem{{\bf wxSTREAM\_NO\_ERROR}}{No error occured.}

docs/latex/wx/strmfile.tex

@@ -4,7 +4,7 @@
 \section{\class{wxFileInputStream}}\label{wxfileinputstream}
 
 This class represents data read in from a file. There are actually
-two such groups of classes: this one is based on the \helpref{wxFile}{wxfile}
+two such groups of classes: this one is based on \helpref{wxFile}{wxfile} 
 whereas \helpref{wxFFileInputStream}{wxffileinputstream} is based in
 the \helpref{wxFFile}{wxffile} class.
 
@@ -65,7 +65,7 @@ Returns TRUE if the stream is initialized and ready.
 \section{\class{wxFileOutputStream}}\label{wxfileoutputstream}
 
 This class represents data written to a file. There are actually
-two such groups of classes: this one is based on the \helpref{wxFile}{wxfile}
+two such groups of classes: this one is based on \helpref{wxFile}{wxfile} 
 whereas \helpref{wxFFileInputStream}{wxffileinputstream} is based in
 the \helpref{wxFFile}{wxffile} class.
 
@@ -154,7 +154,7 @@ Initializes a new file stream in read-write mode using the specified
 \section{\class{wxFFileInputStream}}\label{wxffileinputstream}
 
 This class represents data read in from a file. There are actually
-two such groups of classes: this one is based on the \helpref{wxFFile}{wxffile}
+two such groups of classes: this one is based on \helpref{wxFFile}{wxffile} 
 whereas \helpref{wxFileInputStream}{wxfileinputstream} is based in
 the \helpref{wxFile}{wxfile} class.
 
@@ -215,7 +215,7 @@ Returns TRUE if the stream is initialized and ready.
 \section{\class{wxFFileOutputStream}}\label{wxffileoutputstream}
 
 This class represents data written to a file. There are actually
-two such groups of classes: this one is based on the \helpref{wxFFile}{wxffile}
+two such groups of classes: this one is based on \helpref{wxFFile}{wxffile} 
 whereas \helpref{wxFileInputStream}{wxffileinputstream} is based in
 the \helpref{wxFile}{wxfile} class.
 

docs/latex/wx/tdb.tex

@@ -73,8 +73,6 @@ also get deleted, so beware of holding onto invalid pointers.
 
 \subsection{wxDatabase overview}\label{wxdatabaseoverview}
 
-\overview{Database classes overview}{odbcoverview}
-
 Class: \helpref{wxDatabase}{wxdatabase}
 
 Every database object represents an ODBC connection. To do anything useful
@@ -82,9 +80,11 @@ with a database object you need to bind a wxRecordSet object to it. All you
 can do with wxDatabase is opening/closing connections and getting some info
 about it (users, passwords, and so on).
 
-\subsection{wxQueryCol overview}\label{wxquerycoloverview}
+\wxheading{See also}
 
-\overview{Database classes overview}{odbcoverview}
+\helpref{Database classes overview}{odbcoverview}
+
+\subsection{wxQueryCol overview}\label{wxquerycoloverview}
 
 Class: \helpref{wxQueryCol}{wxquerycol}
 
@@ -93,9 +93,11 @@ It contains the name and type of a column and a list of wxQueryFields where
 the real data is stored. The links to user-defined variables are stored
 here, as well.
 
-\subsection{wxQueryField overview}\label{wxqueryfieldoverview}
+\wxheading{See also}
 
-\overview{Database classes overview}{odbcoverview}
+\helpref{Database classes overview}{odbcoverview}
+
+\subsection{wxQueryField overview}\label{wxqueryfieldoverview}
 
 Class: \helpref{wxQueryField}{wxqueryfield}
 
@@ -108,9 +110,11 @@ or wxRecordSet::GoTo. If wxRecordSet is of the type wxOPEN\_TYPE\_SNAPSHOT,
 all data returned by an ODBC function will be loaded at once and the number
 of wxQueryField instances for each column will depend on the number of records.
 
-\subsection{wxRecordSet overview}\label{wxrecordsetoverview}
+\wxheading{See also}
 
-\overview{Database classes overview}{odbcoverview}
+\helpref{Database classes overview}{odbcoverview}
+
+\subsection{wxRecordSet overview}\label{wxrecordsetoverview}
 
 Class: \helpref{wxRecordSet}{wxrecordset}
 
@@ -118,9 +122,11 @@ Each wxRecordSet represents a database query. You can make multiple queries
 at a time by using multiple wxRecordSets with a wxDatabase or you can make
 your queries in sequential order using the same wxRecordSet.
 
-\subsection{ODBC SQL data types}\label{sqltypes}
+\wxheading{See also}
 
-\overview{Database classes overview}{odbcoverview}
+\helpref{Database classes overview}{odbcoverview}
+
+\subsection{ODBC SQL data types}\label{sqltypes}
 
 These are the data types supported in ODBC SQL. Note that there are other, extended level conformance
 types, not currently supported in wxWindows.
@@ -153,13 +159,19 @@ These data types correspond to the following ODBC identifiers:
 \twocolitem{SQL\_DOUBLE}{Same as SQL\_FLOAT.}
 \end{twocollist}
 
-\subsection{A selection of SQL commands}\label{sqlcommands}
+\wxheading{See also}
 
-\overview{Database classes overview}{odbcoverview}
+\helpref{Database classes overview}{odbcoverview}
+
+\subsection{A selection of SQL commands}\label{sqlcommands}
 
 The following is a very brief description of some common SQL commands, with
 examples.
 
+\wxheading{See also}
+
+\helpref{Database classes overview}{odbcoverview}
+
 \subsubsection{Create}
 
 Creates a table.
@@ -234,5 +246,3 @@ Example:
 This example sets a field in column `X' to the number 123, for the record
 where the column ASSET has the value `BD34'.
 
-
-

docs/latex/wx/time.tex

@@ -2,9 +2,9 @@
 
 Representation of time and date.
 
-NOTE: this class should be
+{\bf NOTE:} this class is retained only for compatibility,
-used with caution, since it is not fully tested. It will be replaced
+and has been replaced by \helpref{wxDateTime}{wxdatetime}. wxTime
-with a new wxDateTime class in the near future.
+may be withdrawn in future versions of wxWindows.
 
 \wxheading{Derived from}
 
@@ -23,7 +23,8 @@ typedef unsigned short secondTy;
 typedef unsigned long clockTy;
 enum tFormat { wx12h, wx24h };
 enum tPrecision { wxStdMinSec, wxStdMin };
-\end{verbatim}}
+\end{verbatim}
+}
 
 \wxheading{See also}
 

docs/latex/wx/window.tex

@@ -1403,9 +1403,12 @@ Sent to the event handler when the window must be refreshed.
 
 \wxheading{Remarks}
 
+
+
 Use the EVT\_PAINT macro in an event table definition to intercept paint events.
 
-In a paint event handler, the application should always create a \helpref{wxPaintDC}{wxpaintdc} object.
+Note that In a paint event handler, the application must {\it always} create a \helpref{wxPaintDC}{wxpaintdc} object,
+even if you do not use it. Otherwise, under MS Windows, refreshing for this and other windows will go wrong.
 
 For example: