only define wxUSE_NATIVE_STATUSBAR for the ports which have it (MSW and Mac)

git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@31382 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775

include/wx/mac/setup0.h

@@ -30,19 +30,19 @@
 // ----------------------------------------------------------------------------
 
 // This setting determines the compatibility with 2.2 API: set it to 1 to
-// enable it.
+// enable it but please consider updating your code instead.
 //
-// Default is 0.
+// Default is 0
 //
-// Recommended setting: 0 (please update your code instead!)
+// Recommended setting: 0 (please update your code)
 #define WXWIN_COMPATIBILITY_2_2 0
 
 // This setting determines the compatibility with 2.4 API: set it to 0 to
 // flag all cases of using deprecated functions.
 //
 // Default is 1 but please try building your code with 0 as the default will
-// change to 0 in the next version and the deprecated functions will
+// change to 0 in the next version and the deprecated functions will disappear
-// completely disappear in the version after that.
+// in the version after it completely.
 //
 // Recommended setting: 0 (please update your code)
 #define WXWIN_COMPATIBILITY_2_4 1
@@ -71,13 +71,11 @@
 // and if __NO_VC_CRTDBG__ is not defined.
 
 // If 1, enables wxDebugContext, for writing error messages to file, etc. If
-// __WXDEBUG__ is not defined, will still use normal memory operators. It's
+// __WXDEBUG__ is not defined, will still use the normal memory operators.
-// recommended to set this to 1, since you may well need to output an error log
-// in a production version (or non-debugging beta).
 //
-// Default is 1.
+// Default is 0
 //
-// Recommended setting: 1 but see comment above
+// Recommended setting: 0
 #define wxUSE_DEBUG_CONTEXT 0
 
 // If 1, enables debugging versions of wxObject::new and wxObject::delete *IF*
@@ -86,10 +84,10 @@
 // WARNING: this code may not work with all architectures, especially if
 // alignment is an issue. This switch is currently ignored for mingw / cygwin
 //
-// Default is 1
+// Default is 0
 //
-// Recommended setting: 1 but see comment in the beginning of this section
+// Recommended setting: 1 if you are not using a memory debugging tool, else 0
-#define wxUSE_MEMORY_TRACING 1
+#define wxUSE_MEMORY_TRACING 0
 
 // In debug mode, cause new and delete to be redefined globally.
 // If this causes problems (e.g. link errors which is a common problem
@@ -105,7 +103,7 @@
 // In debug mode, causes new to be defined to be WXDEBUG_NEW (see object.h). If
 // this causes problems (e.g. link errors), set this to 0. You may need to set
 // this to 0 if using templates (at least for VC++). This switch is currently
-// ignored for mingw / cygwin
+// ignored for mingw / cygwin / CodeWarrior
 //
 // Default is 0
 //
@@ -123,7 +121,8 @@
 // Default is 1
 //
 // Recommended setting: 1 if your compiler supports it.
-#ifdef _MSC_VER
+#if defined(_MSC_VER) || \
+    (defined(__BORLANDC__) && __BORLANDC__ >= 0x0550)
     #define wxUSE_ON_FATAL_EXCEPTION 1
 #else
     #define wxUSE_ON_FATAL_EXCEPTION 0
@@ -137,14 +136,32 @@
 // defined as wchar_t, wxString will use Unicode internally. If you set this
 // to 1, you must use wxT() macro for all literal strings in the program.
 //
-// Unicode is currently only fully supported under Windows NT/2000 (Windows 9x
+// Unicode is currently only fully supported under Windows NT/2000/XP
-// doesn't support it and the programs compiled in Unicode mode will not run
+// (Windows 9x doesn't support it and the programs compiled in Unicode mode
-// under 9x).
+// will not run under 9x -- but see wxUSE_UNICODE_MSLU below).
 //
 // Default is 0
 //
-// Recommended setting: 0 (unless you only plan to use Windows NT/2000)
+// Recommended setting: 0 (unless you only plan to use Windows NT/2000/XP)
-#define wxUSE_UNICODE 0
+#ifndef wxUSE_UNICODE
+    #define wxUSE_UNICODE 0
+#endif
+
+// Set wxUSE_UNICODE_MSLU to 1 if you want to compile wxWidgets in Unicode mode
+// and be able to run compiled apps under Windows 9x as well as NT/2000/XP.
+// This setting enables use of unicows.dll from MSLU (MS Layer for Unicode, see
+// http://www.microsoft.com/globaldev/handson/dev/mslu_announce.mspx). Note
+// that you will have to modify the makefiles to include unicows.lib import
+// library as the first library (see installation instructions in install.txt
+// to learn how to do it when building the library or samples).
+//
+// If your compiler doesn't have unicows.lib, you can get a version of it at
+// http://libunicows.sourceforge.net
+//
+// Default is 0
+//
+// Recommended setting: 0 (1 if you want to deploy Unicode apps on 9x systems)
+#define wxUSE_UNICODE_MSLU 0
 
 // Setting wxUSE_WCHAR_T to 1 gives you some degree of Unicode support without
 // compiling the program in Unicode mode. More precisely, it will be possible
@@ -173,6 +190,27 @@
 //                      in your own code (1 if you do, 0 if you don't)
 #define wxUSE_EXCEPTIONS    1
 
+// Set wxUSE_EXTENDED_RTTI to 1 to use extended RTTI
+//
+// Default is 0
+//
+// Recommended setting: 0
+#define wxUSE_EXTENDED_RTTI 0
+
+#if defined(__BORLANDC__)
+#undef wxUSE_EXTENDED_RTTI
+#define wxUSE_EXTENDED_RTTI 1
+#endif
+
+// Set wxUSE_STL to 1 to derive wxList(Foo) and wxArray(Foo) from
+// std::list<Foo*> and std::vector<Foo*>, with a compatibility interface,
+// and for wxHashMap to be implemented with templates.
+//
+// Default is 0
+//
+// Recommended setting: YMMV
+#define wxUSE_STL 0
+
 // Support for message/error logging. This includes wxLogXXX() functions and
 // wxLog and derived classes. Don't set this to 0 unless you really know what
 // you are doing.
@@ -182,13 +220,13 @@
 // Recommended setting: 1 (always)
 #define wxUSE_LOG 1
 
-// Recommended setting: 1 (always)
+// Recommended setting: 1
 #define wxUSE_LOGWINDOW 1
 
-// Recommended setting: 1 (always)
+// Recommended setting: 1
 #define wxUSE_LOGGUI 1
 
-// Recommended setting: 1 (always)
+// Recommended setting: 1
 #define wxUSE_LOG_DIALOG 1
 
 // Support for command line parsing using wxCmdLineParser class.
@@ -204,7 +242,7 @@
 // library without it if you have no use for it - this will result in a
 // somewhat smaller and faster operation.
 //
-// Threads are only supported under Win32.
+// This is ignored under Win16, threads are only supported under Win32.
 //
 // Default is 1
 //
@@ -217,9 +255,6 @@
 // Use standard C++ streams if 1. If 0, use wxWin streams implementation.
 #define wxUSE_STD_IOSTREAM  0
 
-// Use serialization (requires utils/serialize)
-#define wxUSE_SERIAL        0
-
 // ----------------------------------------------------------------------------
 // non GUI features selection
 // ----------------------------------------------------------------------------
@@ -247,6 +282,13 @@
 #define wxUSE_FILE          1
 #define wxUSE_FFILE         1
 
+// Use wxFSVolume class providing access to the configured/active mount points
+//
+// Default is 1
+//
+// Recommended setting: 1 (but may be safely disabled if you don't use it)
+#define wxUSE_FSVOLUME      1
+
 // use wxTextBuffer class: required by wxTextFile
 #define wxUSE_TEXTBUFFER    1
 
@@ -330,8 +372,8 @@
 // Recommended setting: 1
 #define wxUSE_DYNLIB_CLASS    1
 
-// experimental extension, use with caution.
+// experimental, don't use for now
-#define wxUSE_DYNAMIC_LOADER  0
+#define wxUSE_DYNAMIC_LOADER  1
 
 // Set to 1 to use socket classes
 #define wxUSE_SOCKETS       1
@@ -386,6 +428,16 @@
 // Define this to use wxURL class.
 #define wxUSE_URL 1
 
+// Define this to use native platform url and protocol support.
+// Currently valid only for MS-Windows.
+// Note: if you set this to 1, you can open ftp/http/gopher sites
+// and obtain a valid input stream for these sites
+// even when you set wxUSE_PROTOCOL_FTP/HTTP to 0.
+// Doing so reduces the code size.
+//
+// This code is experimental and subject to change.
+#define wxUSE_URL_NATIVE 0
+
 // Support for regular expression matching via wxRegEx class: enable this to
 // use POSIX regular expressions in your code. You need to compile regex
 // library from src/regex to use it under Windows.
@@ -409,6 +461,20 @@
 // Recommended setting: 1 
 #define wxUSE_MEDIACTRL     1
 
+// Use QuickTime
+//
+// Default is 0
+//
+// Recommended setting: 1 if you have the QT SDK installed and you need it, else 0
+#define wxUSE_QUICKTIME     0
+
+// Use DirectShow (requires linkage to strmiids.lib)
+//
+// Default is 0
+//
+// Recommended setting: 1 if the DirectX 7 SDK is installed (highly recommended), else 0
+#define wxUSE_DIRECTSHOW    0
+
 // Use wxWidget's XRC XML-based resource system.  Recommended.
 //
 // Default is 1
@@ -441,20 +507,20 @@
 #define wxUSE_CONTROLS     1
 
 // wxPopupWindow class is a top level transient window. It is currently used
-// to implement wxTipWindow but doesn't work yet under Mac.
+// to implement wxTipWindow
 //
-// Default is  0
+// Default is 1
 //
-// Recommended setting: 0
+// Recommended setting: 1 (may be set to 0 if you don't wxUSE_TIPWINDOW)
-#define wxUSE_POPUPWIN     0
+#define wxUSE_POPUPWIN     1
 
 // wxTipWindow allows to implement the custom tooltips, it is used by the
 // context help classes. Requires wxUSE_POPUPWIN.
 //
-// Default is 0
+// Default is 1
 //
-// Recommended setting: 0
+// Recommended setting: 1 (may be set to 0)
-#define wxUSE_TIPWINDOW    0
+#define wxUSE_TIPWINDOW    1
 
 // Each of the settings below corresponds to one wxWidgets control. They are
 // all switched on by default but may be disabled if you are sure that your
@@ -472,6 +538,7 @@
 #define wxUSE_CHECKLISTBOX 1    // wxCheckListBox (requires wxUSE_OWNER_DRAWN)
 #define wxUSE_CHOICE       1    // wxChoice
 #define wxUSE_COMBOBOX     1    // wxComboBox
+#define wxUSE_DATEPICKCTRL 1    // wxDatePickerCtrl
 #define wxUSE_GAUGE        1    // wxGauge
 #define wxUSE_LISTBOX      1    // wxListBox
 #define wxUSE_LISTCTRL     1    // wxListCtrl
@@ -486,7 +553,7 @@
 #define wxUSE_STATTEXT     1    // wxStaticText
 #define wxUSE_STATBMP      1    // wxStaticBitmap
 #define wxUSE_TEXTCTRL     1    // wxTextCtrl
-#define wxUSE_TOGGLEBTN    0    // requires wxButton
+#define wxUSE_TOGGLEBTN    1    // requires wxButton
 #define wxUSE_TREECTRL     1    // wxTreeCtrl
 
 // Use a status bar class? Depending on the value of wxUSE_NATIVE_STATUSBAR
@@ -501,10 +568,14 @@
 // or the wrapper around native control. For native look and feel the native
 // version should be used.
 //
-// Default is 1.
+// Default is 1 for the platforms where native status bar is supported.
 //
 // Recommended setting: 1 (there is no advantage in using the generic one)
+#if defined(__WXMSW__) || defined(__WXMAC__)
 #define wxUSE_NATIVE_STATUSBAR        1
+#else
+#define wxUSE_NATIVE_STATUSBAR        0
+#endif
 
 // wxToolBar related settings: if wxUSE_TOOLBAR is 0, don't compile any toolbar
 // classes at all. Otherwise, use the native toolbar class unless
@@ -517,7 +588,7 @@
 #define wxUSE_TOOLBAR_NATIVE 1
 
 // wxNotebook is a control with several "tabs" located on one of its sides. It
-// may be used ot logically organise the data presented to the user instead of
+// may be used to logically organise the data presented to the user instead of
 // putting everything in one huge dialog. It replaces wxTabControl and related
 // classes of wxWin 1.6x.
 //
@@ -552,13 +623,19 @@
 
 // wxGrid class
 //
-// Default is 1
+// Default is 1, set to 0 to cut down compilation time and binaries size if you
+// don't use it.
 //
 // Recommended setting: 1
+//
 #define wxUSE_GRID         1
 
-// wxProperty[Value/Form/List] classes, used by Dialog Editor
+// wxMiniFrame class: a frame with narrow title bar
-#define wxUSE_PROPSHEET    0
+//
+// Default is 1.
+//
+// Recommended setting: 1 (it doesn't cost almost anything)
+#define wxUSE_MINIFRAME 1
 
 // ----------------------------------------------------------------------------
 // Miscellaneous GUI stuff
@@ -567,6 +644,9 @@
 // wxAcceleratorTable/Entry classes and support for them in wxMenu(Bar)
 #define wxUSE_ACCEL 1
 
+// Hotkey support (currently Windows only)
+#define wxUSE_HOTKEY 1
+
 // Use wxCaret: a class implementing a "cursor" in a text control (called caret
 // under Windows).
 //
@@ -626,9 +706,6 @@
 // wxValidator class and related methods
 #define wxUSE_VALIDATORS 1
 
-// wxDC cacheing implementation
-#define wxUSE_DC_CACHEING 0
-
 // ----------------------------------------------------------------------------
 // common dialogs
 // ----------------------------------------------------------------------------
@@ -765,12 +842,15 @@
 // smaller library.
 #define wxUSE_HTML          1
 
-// wxWebKit is a wrapper for Apple's WebKit framework, use it if you want to embed
+// Setting wxUSE_GLCANVAS to 1 enables OpenGL support. You need to have OpenGL
-// the Safari browser control
+// headers and libraries to be able to compile the library with wxUSE_GLCANVAS
-// 0 by default because of Jaguar compatibility problems
+// set to 1. Note that for some compilers (notably Microsoft Visual C++) you
-#define wxUSE_WEBKIT        0
+// will need to manually add opengl32.lib and glu32.lib to the list of
-
+// libraries linked with your program if you use OpenGL.
-// OpenGL canvas
+//
+// Default is 0.
+//
+// Recommended setting: 1 if you intend to use OpenGL, 0 otherwise
 #define wxUSE_GLCANVAS       0
 
 // ----------------------------------------------------------------------------
@@ -801,6 +881,14 @@
 // Recommended setting: 1
 #define wxUSE_DRAG_AND_DROP 1
 
+// Use wxAccessible for enhanced and customisable accessibility.
+// Depends on wxUSE_OLE.
+//
+// Default is 0.
+//
+// Recommended setting (at present): 0
+#define wxUSE_ACCESSIBILITY 0
+
 // ----------------------------------------------------------------------------
 // miscellaneous settings
 // ----------------------------------------------------------------------------
@@ -816,13 +904,17 @@
 
 #define wxUSE_DRAGIMAGE 1
 
-#define wxUSE_IPC         0
+#define wxUSE_IPC         1
                                 // 0 for no interprocess comms
 #define wxUSE_HELP        1
                                 // 0 for no help facility
-#define wxUSE_WXHTML_HELP 1
+#define wxUSE_MS_HTML_HELP 1
                                 // 0 for no MS HTML Help
-#define wxUSE_RESOURCES   1
+
+// Use wxHTML-based help controller?
+#define wxUSE_WXHTML_HELP 1
+
+#define wxUSE_RESOURCES   0
                                 // 0 for no wxGetResource/wxWriteResource
 #define wxUSE_CONSTRAINTS 1
                                 // 0 for no window layout constraint system
@@ -841,7 +933,11 @@
 #define wxUSE_POSTSCRIPT  0
 
 // Set to 1 to use font metric files in GetTextExtent
-#define wxUSE_AFM_FOR_POSTSCRIPT 0
+#define wxUSE_AFM_FOR_POSTSCRIPT 1
+
+// Set to 0 to disable PostScript print/preview architecture code under Windows
+// (just use Windows printing).
+#define wxUSE_POSTSCRIPT_ARCHITECTURE_IN_MSW 1
 
 // ----------------------------------------------------------------------------
 // database classes
@@ -879,16 +975,14 @@
 #define REMOVE_UNUSED_ARG   1
 
 // VC++ 4.2 and above allows <iostream> and <iostream.h> but you can't mix
-// them. Set to 1 for <iostream.h>, 0 for <iostream>
+// them. Set to 1 for <iostream.h>, 0 for <iostream>. Note that VC++ 7.1
+// and later doesn't support wxUSE_IOSTREAMH == 1 and so <iostream> will be
+// used anyhow.
 //
 // Default is 1.
 //
 // Recommended setting: whatever your compiler likes more
-#ifndef __MWERKS__
-#define wxUSE_IOSTREAMH     0
-#else
 #define wxUSE_IOSTREAMH     1
-#endif
 
 // ----------------------------------------------------------------------------
 // image format support
@@ -923,7 +1017,7 @@
 // Set to 1 for PCX format support
 #define wxUSE_PCX           1
 
-// Set to 1 for IFF format support
+// Set to 1 for IFF format support (Amiga format)
 #define wxUSE_IFF           0
 
 // Set to 1 for XPM format support
@@ -935,10 +1029,6 @@
 // Set to 1 to compile in wxPalette class
 #define wxUSE_PALETTE       1
 
-// If 1, enables provision of run-time type information.
-// NOW MANDATORY: don't change.
-#define wxUSE_DYNAMIC_CLASSES     1
-
 /* --- end common options --- */
 
 // ----------------------------------------------------------------------------

include/wx/msw/setup0.h

@@ -567,10 +567,14 @@
 // or the wrapper around native control. For native look and feel the native
 // version should be used.
 //
-// Default is 1.
+// Default is 1 for the platforms where native status bar is supported.
 //
 // Recommended setting: 1 (there is no advantage in using the generic one)
+#if defined(__WXMSW__) || defined(__WXMAC__)
 #define wxUSE_NATIVE_STATUSBAR        1
+#else
+#define wxUSE_NATIVE_STATUSBAR        0
+#endif
 
 // wxToolBar related settings: if wxUSE_TOOLBAR is 0, don't compile any toolbar
 // classes at all. Otherwise, use the native toolbar class unless
@@ -618,12 +622,20 @@
 
 // wxGrid class
 //
-// Default is 1 for both options.
+// Default is 1, set to 0 to cut down compilation time and binaries size if you
+// don't use it.
 //
 // Recommended setting: 1
 //
 #define wxUSE_GRID         1
 
+// wxMiniFrame class: a frame with narrow title bar
+//
+// Default is 1.
+//
+// Recommended setting: 1 (it doesn't cost almost anything)
+#define wxUSE_MINIFRAME 1
+
 // ----------------------------------------------------------------------------
 // Miscellaneous GUI stuff
 // ----------------------------------------------------------------------------
@@ -693,16 +705,6 @@
 // wxValidator class and related methods
 #define wxUSE_VALIDATORS 1
 
-// wxDC cacheing implementation
-#define wxUSE_DC_CACHEING 1
-
-// Set this to 1 to enable the use of DIB's for wxBitmap to support
-// bitmaps > 16MB on Win95/98/Me.  Set to 0 to use DDB's only.
-#define wxUSE_DIB_FOR_BITMAP 0
-
-// Set this to 1 to enable wxDIB
-#define wxUSE_WXDIB 1
-
 // ----------------------------------------------------------------------------
 // common dialogs
 // ----------------------------------------------------------------------------
@@ -911,7 +913,7 @@
 // Use wxHTML-based help controller?
 #define wxUSE_WXHTML_HELP 1
 
-#define wxUSE_RESOURCES   1
+#define wxUSE_RESOURCES   0
                                 // 0 for no wxGetResource/wxWriteResource
 #define wxUSE_CONSTRAINTS 1
                                 // 0 for no window layout constraint system

include/wx/setup_inc.h

@@ -552,10 +552,14 @@
 // or the wrapper around native control. For native look and feel the native
 // version should be used.
 //
-// Default is 1.
+// Default is 1 for the platforms where native status bar is supported.
 //
 // Recommended setting: 1 (there is no advantage in using the generic one)
+#if defined(__WXMSW__) || defined(__WXMAC__)
 #define wxUSE_NATIVE_STATUSBAR        1
+#else
+#define wxUSE_NATIVE_STATUSBAR        0
+#endif
 
 // wxToolBar related settings: if wxUSE_TOOLBAR is 0, don't compile any toolbar
 // classes at all. Otherwise, use the native toolbar class unless
@@ -603,12 +607,20 @@
 
 // wxGrid class
 //
-// Default is 1 for both options.
+// Default is 1, set to 0 to cut down compilation time and binaries size if you
+// don't use it.
 //
 // Recommended setting: 1
 //
 #define wxUSE_GRID         1
 
+// wxMiniFrame class: a frame with narrow title bar
+//
+// Default is 1.
+//
+// Recommended setting: 1 (it doesn't cost almost anything)
+#define wxUSE_MINIFRAME 1
+
 // ----------------------------------------------------------------------------
 // Miscellaneous GUI stuff
 // ----------------------------------------------------------------------------
@@ -886,7 +898,7 @@
 // Use wxHTML-based help controller?
 #define wxUSE_WXHTML_HELP 1
 
-#define wxUSE_RESOURCES   1
+#define wxUSE_RESOURCES   0
                                 // 0 for no wxGetResource/wxWriteResource
 #define wxUSE_CONSTRAINTS 1
                                 // 0 for no window layout constraint system

setup.h.in

@@ -319,7 +319,11 @@
 
 #define wxUSE_STATUSBAR    1
 
+#if defined(__WXMSW__) || defined(__WXMAC__)
 #define wxUSE_NATIVE_STATUSBAR        1
+#else
+#define wxUSE_NATIVE_STATUSBAR        0
+#endif
 
 #define wxUSE_TOOLBAR 1
 #define wxUSE_TOOLBAR_NATIVE 1
@@ -334,6 +338,8 @@
 
 #define wxUSE_GRID         1
 
+#define wxUSE_MINIFRAME 1
+
 
 #define wxUSE_ACCEL 1
 
@@ -486,17 +492,12 @@
 
 /* --- end common options --- */
 
-/* enable native status bar under Win32 */
+/* for some features we don't have dedicated configure switches, so just choose
-#if defined(__WIN95__) && !defined(__WXUNIVERSAL__)
+ * the common values automatically */
-#define wxUSE_NATIVE_STATUSBAR 1
+#if (defined(__WIN95__) && !defined(__WXUNIVERSAL__)) || defined(__WXPM__)
 #define wxUSE_OWNER_DRAWN 1
 #endif
 
-#if defined(__WXPM__)
-#define wxUSE_OWNER_DRAWN 1
-#endif
-
-/* enable rich edit under Win32 */
 #if defined(__WIN95__) && !defined(__WINE__) && !defined(__GNUWIN32_OLD__)
 #define wxUSE_RICHEDIT 1
 #else
@@ -569,10 +570,6 @@
  * case WX_NO_REGEX_ADVANCED should be defined.
  */
 #undef WX_NO_REGEX_ADVANCED
-/*
- * Use XML support
- */
-#define wxUSE_XML 0
 /*
  * Use SDL for audio (Unix)
  */
@@ -598,10 +595,8 @@
  */
 #define wxHAVE_LIB_XPM 0
 /*
- * Use font metric files in GetTextExtent for wxPostScriptDC
  * Use consistent PostScript fonts for AFM and printing (!)
  */
-#define wxUSE_AFM_FOR_POSTSCRIPT 0
 #define wxUSE_NORMALIZED_PS_FONTS 0
 
 /* compatibility */